The table is provided so that it can be used by HUD recipients as a stand-alone chart that lists, in a single table, not only what the exceptions are, but what actions recipients must undertake...
Search Results "Vertical Standing Support"
-
Note Regarding Comparative Table
-
809.5.5.2 Identification
In doors, peepholes that include prisms clarify the image and should offer a wide-angle view of the hallway or exterior for both standing persons and wheelchair users....
-
Grade
This may be expressed as the percentage of change in elevation (grade) or as a ratio of vertical distance to horizontal distance (running slope)....
-
Cross Slope
This may be expressed as the percentage of change in elevation or as a ratio of vertical distance to horizontal distance. ...
-
Running Slope (Grade)
This may be expressed as a ratio of vertical distance to horizontal distance or as the percentage of change in elevation. ...
-
11B-604.8.1.4 Toe clearance
provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side face of the partition, exclusive of partition support...
-
11B-604.8.1.4 Toe clearance
provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side face of the partition, exclusive of partition support...
-
504.2.1 Preservation of Accessibility Information in Format Conversion (Section-by-Section Analysis)
Analysis) This section proposes that authoring tools, when converting content or saving content in multiple formats, must preserve information required for accessibility to the extent supported...
-
Stress Management
Provide praise and positive reinforcement Refer to EAP Allow employee to make telephone calls for support Provide sensitivity training for workforce Allow the presence and use of...
-
11B-806.2.3.1 Personal lift device floor space
The clearance shall be parallel to the long side of the bed and extend under the bed to points horizontally 30 inches (762 mm), vertically 7 inches (178 mm) and not more than 12 inches (...
-
Gaps: ADA Standard Section 1002.4.3
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the vertical...
-
406.2.2 Clear height
While the minimum height is required to be 7'-0" by this section, greater vertical clearance is required at van-accessible parking spaces, standard accessible parking spaces, the vehicular...
-
§382.27(c)(8)
(8) Transportation of an emotional support or psychiatric service animal in the cabin;...
-
HANDRAIL
A horizontal or sloping rail intended for grasping by the hand for guidance or support....
-
HANDRAIL
A horizontal or sloping rail intended for grasping by the hand for guidance or support....
-
Entrance
An entrance includes the approach walk, the vertical access leading to the entrance platform, the entrance platform itself, vestibule if provided, the entry door or gate, and the hardware...
-
ENTRANCE
An entrance includes the approach walk, the vertical access leading to the entrance platform, the entrance platform itself, vestibule if provided, the entry door or gate, and the hardware...
-
ENTRANCE
An entrance includes the approach walk, the vertical access leading to the entrance platform, the entrance platform itself, vestibule if provided, the entry door or gate, and the hardware...
-
106.5.29 Entrance
An entrance includes the approach walk, the vertical access leading to the entrance platform, the entrance platform itself, vestibule if provided, the entry door or gate, and the hardware...
- Magnuson Group WH Hanger Style Wall Rack
-
Platform and Vehicle Floor Coordination: ADA Standard Section 810.5.3
In light rail, commuter rail, and intercity rail systems where it is not operationally or structurally feasible to meet the horizontal gap or vertical difference requirements of part 1192...
- seca 684 r Digital Multifunctional Scale with Integrated RS232 Interface
-
12209(a)(1) Commitment to Rule XLII
.-- The Senate reaffirms its commitment to Rule XLII of the Standing Rules of the Senate which provides as follows: No member, officer, or employee of the Senate shall, with respect to...
-
Exceptions [1014.1, Exceptions 1 and 2]
Many times, the roof of a camp shelter is sloped or does not permit someone to stand fully erect while in the shelter....