Where the reach depth to the operable parts of all controls as measured from the vertical plane perpendicular to the edge of the unobstructed clear floor space at the farthest protrusion...
Search Results "Vertical Standing Support"
Commonly Searched Documents
-
4.34.3(2)(a) Reach Depth Not More Than 10 in
-
§ 38.95(b)(7) Platform gaps
car floor height with the inner barrier down (if applicable) or retracted, gaps between the forward lift platform edge and car floor shall not exceed 1/2 inch horizontally and 5/8 inch vertically...
-
§ 38.125(b)(7) Platform gaps
car floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and car floor shall not exceed 1/2 inch horizontally and 5/8 inch vertically...
-
11B-704.5 TTY shelf
The shelf shall be capable of accommodating a TTY and shall have 6 inches (152 mm) minimum vertical clearance above the area where the TTY is to be placed....
-
Step 1 - Start Implementation
A well-publicized public declaration of support or adoption of a formal policy statement can set a positive tone that facilitates staff involvement and promotes support and cooperation....
-
The Americans with Disabilities Act
It embodies a philosophy and constitutes a declaration in support of human possibility and capability. . . ....
-
§382.117(e)(2)
(2) The passenger needs the emotional support or psychiatric service animal as an accommodation for air travel and/or for activity at the passenger's destination;...
-
4.34.6.4(3)
(3) Counter thickness and supporting structure shall be 2 in (50 mm) maximum over the required clear area....
-
4.34.6.5(6)
(6) Counter thickness and supporting structure shall be 2 in (50 mm) maximum over the required clear space....
-
68.10(3) Building
(3) Building--Any structure located in the State of Texas that is used and intended for supporting or sheltering any use or occupancy....
- ZoomText 10.1 for Windows 8 Introductory Video
- DORMA 8000 Series Exit Device
- Variety Freedom Program
-
407.8 Reach Height and Depth
At least one of each type of operable part of stationary ICT shall be at a height conforming to 407.8.2 or 407.8.3 according to its position established by the vertical reference plane specified...
-
704.5 TTY Shelf
The shelf shall be capable of accommodating a TTY and shall have 6 inches (150 mm) minimum vertical clearance above the area where the TTY is to be placed....
-
ENTRANCE
An entrance includes the approach walk, the vertical access leading to the entrance platform, the entrance platform itself, vestibules if provided, the entry door(s) or gate(s), and the...
-
Mezzanines (Private and Public Sector Facilities) [§206.2.4, Ex. 3]
Mezzanines (Private and Public Sector Facilities) [§206.2.4, Ex. 3] An accessible route must serve mezzanines in multi-story facilities where vertical access between stories is required...
-
11B-703.2.5 Character height
Character height measured vertically from the baseline of the character shall be 5/8 inch (15.9 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....
-
5.8.2.4 Unobstructed Floor Space
The unobstructed floor space in front of the base support should be a minimum of 17 inches deep....
-
504.1 General
Where an application is an authoring tool, the application shall conform to 504 to the extent that information required for accessibility is supported by the destination format....
-
11B-504.5 Nosings
Risers shall be permitted to slope under the tread at an angle of 30 degrees maximum from vertical....
-
Scoping [4.1.2(5)]
Lot Total Minimum Accessible Lot Total Minimum Accessible stand. van total stand....
-
4.Information, documentation, and training
Such information and documentation includes user guides, installation guides for end-user installable devices, and product support communications, regarding both the product in general and...
-
Size or weight limitations. (Section-by-Section Analysis)
The vast majority of commenters did not support a size or weight limitation....