(3) Signals shall be visible from the vicinity of the hall call button (see Fig. 20)....
Search Results "Signalized Intersection"
-
4.10.4(3)
-
4.10.3 Hall Call Buttons
Such call buttons shall have visual signals to indicate when each call is registered and when each call is answered....
-
4.10.3 HALL CALL BUTTONS
Such call buttons shall have visual signals to indicate when each call is registered and when each call is answered....
-
1132A.10 Door signal devices
Every primary entrance to a covered multifamily dwelling unit shall be provided with a door buzzer, bell, chime or equivalent. The activating mechanism shall be mounted a maximum of...
-
1132A.10 Door signal devices
Every primary entrance to a covered multifamily dwelling unit shall be provided with a door buzzer, bell, chime or equivalent. The activating mechanism shall be mounted a maximum of...
-
Small Business Accessibility: BigBell
Disability Access for Small Businesses; product information for BigBell wireless door alert system.
-
Step Hear Call Hear CH-100
Video demonstrates a call and assist system comprised of a wireless call button and a chime alert unit located near an employee.
-
A4.10.13 Car Position Indicators
A special button may be provided that would activate the audible signal within the given elevator only for the desired trip, rather than maintaining the audible signal in constant operation...
-
A4.10.13 CAR POSITION INDICATORS
A special button may be provided that would activate the audible signal within the given elevator only for the desired trip, rather than maintaining the audible signal in constant operation...
-
2.1.2.2 Additional Proposed Specifications (by Oval Window Audio)
Input Signal Compression: To compensate for fluctuating signal input levels, an automatic gain control, signal compression, and/or adjustable non-distorting peak limited must be employed...
-
Issue 9: Reach (how far?)
Issue 9: Reach (how far?) APS devices can be located in landscaped areas if the pushbutton is reachable from a level paved area. Figure 12 shows a location where new APS (and new...
-
Car Position Indicators [4.10.13]
Visual and audible signals that indicate car position are required. Verbal announcements are acceptable and can substitute for chimes or other audible signals....
-
4.10.13* Car Position Indicators
As the car passes or stops at a floor served by the elevators, the corresponding numerals shall illuminate, and an audible signal shall sound....
-
4.10.13* CAR POSITION INDICATORS
As the car passes or stops at a floor served by the elevators, the corresponding numerals shall illuminate, and an audible signal shall sound....
-
Destination-Oriented Elevators
Destination-Oriented Elevators: Call Signals Destination-Oriented Elevators: Car Arrival Other provisions unique to destination-oriented elevators: Elevator Door Requirements...
-
Location
Location Pushbutton-integrated APS rely on relative proximity to the crossing location, not on difference in sounds, to clarify which street crossing is being signaled....
-
Two-way Communication [4.3.11.4]
The two-way communication system must be equipped with both audible signals (for people with vision impairments) and visual signals (for people with hearing impairments) and cannot operate...
-
SENSORY PROVISIONS
., increased amplification, increased signal-to-noise ratio, or combination). For transmitted voice signals, provide a gain adjustable up to a minimum of 20 dB gain....
-
Elevator Door Requirements [§407.3]
Elevator Door Requirements [§407.3]
-
§ 38.173(c)
(c) In stations where open platforms are not protected by platform screens, a suitable device or system shall be provided to prevent, deter or warn individuals from stepping off the...
-
Accessible Pittsburgh: Pedestrian Safety
Published on Jun 4, 2015 Updated video on pedestrian safety
-
e-vii
e-vii. Is the elevator equipped with audible tones or bells or verbal annunciators that announce each floor as it is passed? [ADA Standards § 4.10.13] Yes No
-
5f.
5f. Is the elevator equipped with audible tones or bells or verbal annunciators that announce each floor as it is passed? [ADA Stds 4.10.13]
-
8.4 Recommendations
The signal-to-noise ratio for internally generated noise cannot be less than 18 dB. 4. The peak clipping levels down from the peak cannot be greater than 18 dB....
