Grade is calculated by dividing the vertical change in elevation by the horizontal distance covered, and is expressed as a percent....
Search Results "Horizontal Standing Support"
Filters
Commonly Searched Documents
-
Grade (R302.5) (Section-by-Section Analysis)
-
1.1.12 Ramp cross slope
overall cross slope of ramps by establishing elevations at the extreme edges of the ramp at the top and bottom of the ramp and calculate the cross slope at these two locations using the horizontal...
-
Stairs
At the bottom, the handrail shall continue to slope for a distance of the width of one tread from the bottom riser; the remainder of the extension shall be horizontal (see Fig. 19(c) and...
-
11B-405.9 Edge protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (12.7 mm) maximum within 10 inches (254 mm) horizontally of the minimum landing area...
-
1009.7.2 Separation
The fire-resistance-rated exterior wall construction shall extend horizontally 10 feet (3048 mm) beyond the landing on either side of the landing or equivalent fire-resistance-rated construction...
-
1009.3.3 Area of Refuge
Areas of refuge are not required for stairways accessed from a refuge area in conjunction with a horizontal exit....
-
11B-405.9 Edge protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (12.7 mm) maximum within 10 inches (254 mm) horizontally of the minimum landing area...
-
PLATFORM (WHEELCHAIR) LIFT
A hoisting and lowering mechanism equipped with a car or platform or support that serves two landings of a building or structure and is designed to carry a passenger or passengers and (or...
-
C206.1 General (Section-by-Section Analysis)
C206.1 General (Section-by-Section Analysis) This section proposes to require that where support documentation or services are provided, they must conform to the proposed provisions of...
-
Usable
access to the full functionality and documentation for the product, including instructions, product information (including accessible feature information), documentation, and technical support...
-
11B-602.5 Spout location
The spout shall be located 15 inches (381 mm) minimum from the vertical support and 5 inches (127 mm) maximum from the front edge of the unit, including bumpers....
-
11B-708.4.2 Residential dwelling unit interface
The residential dwelling unit system interface shall include a telephone jack capable of supporting voice and TTY communication with the common use or public use system interface....
-
NFPA
unfinished attic or an exterior wall, smoke alarms and smoke detectors shall be mounted on an inside wall. 4) Smoke alarms or smoke detectors shall be installed a minimum of 20 feet horizontal...
-
411.1.1 Decoding of Closed Captions (Section-by-Section Analysis)
Captions (Section-by-Section Analysis) This section proposes that, where audio-visual players and displays process video with synchronized audio, they must decode closed caption data and support...
-
§100.500(b)(2)
(2) A legally sufficient justification must be supported by evidence and may not be hypothetical or speculative....
-
410.6 Real-Time Text Functionality (Section-by-Section Analysis)
Proposed 410.6 would require that, where ICT supports real-time voice communication, it must also support RTT functionality....
-
Stages.
If the witness stand is raised, then either a ramp or lift must be provided to ensure access to the witness stand. ...
-
B.
Cases concerning standing, like Newport News, and the normal rules of construction govern here....
-
Appendix D: Photometric Measurements
Measurements were made with a circular one-degree field of view with the tripod-mounted detector set approximately 52 inches higher than the measured surface and at a horizontal distance...
-
5.8.2.4 Unobstructed Floor Space Recommendation
The base support affects how close the patient can get to the mammography machine because it intrudes into the floor space....
-
Lutron Sivoia QS Wireless Shading System
control the entire family of Lutron automated window treatments, including roller shades, Venetian blinds, traditional drapery tracks, Kirbé® Vertical Drapery System, tensioned shades, horizontal...
-
M302.1 General
Diagnostic equipment that supports patients in a seated position shall comply with M302. ...
-
§ 1194.2(a)(2)
(2) When procuring a product, if an agency determines that compliance with any provision of this part imposes an undue burden, the documentation by the agency supporting the procurement...
-
4.26.3(3)
Shear force induced in a fastener or mounting device from the application of 250 lbf (1112N) shall be less than the allowable lateral load of either the fastener or mounting device or the supporting...
