Characters shall be 1/2 inch (13 mm) high minimum.
Search Results "Line Spacing (Visual)"
Filters
Commonly Searched Documents
-
407.4.8.1.1 Size
-
407.4.8.1.1 Size
407.4.8.1.1 Size. Characters shall be ½ inch (13 mm) high minimum.
-
Character Height [4.30.3]
Character Height [4.30.3] Characters must be sized according to the viewing distance although a minimum 3 inch upper case or capital letter height is required for overhead signs...
-
11B-407.4.8.1.1 Size
Characters shall be ½ inch (12.7 mm) high minimum.
-
[F] 907.5.2.3.1 Public and common use areas
Visible alarm notification appliances shall be provided in public use areas and common use areas, including but not limited to: Band...
-
11B-703.8.4 Character height
11B-703.8.4 Character height. The uppercase letter “I” shall be used to determine the allowable height of all low resolution VMS characters of a font. Viewing distance shall be...
-
[F] 907.5.2.3.1 Public and common use areas
Visible alarm notification appliances shall be provided in public use areas and common use area, including but not limited to: Band...
-
11B-407.4.8.1.1 Size
Characters shall be ½ inch (12.7 mm) high minimum.
-
11B-703.8.4 Character height
The uppercase letter “I” shall be used to determine the allowable height of all low resolution VMS characters of a font. Viewing distance shall be measured as the horizontal distance...
-
1009.6.3 Size
Each area of refuge shall be sized to accommodate two wheelchair spaces that are not less than 30 inches by 48 inches (762 mm by 1219 mm)....
-
Width [4.3.3.] and Passing Space [4.3.4]
However, the minimum width of hallways and corridors is often further determined by ADAAG requirements for clear floor space at elements such as drinking fountains, door maneuvering clearances...
-
Wheelchair Passage Width [4.2.1] and Passing Space [4.2.2]
A minimum width of 30 inches is generally sufficient for stationary space. Additional clearance is needed for maneuvering and sway....
-
Plantronics Clarity XLC2 Phone
Information and product review of the Plantronics XLC2 by The Arthritis Foundation
-
Machinery Spaces (§203.5)
Machinery Spaces (§203.5) Spaces used only by service personnel for maintenance, repair, or occasional monitoring of equipment Examples: elevator pits/ penthouses, mechanical/...
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
12162(a)(3)(A)(ii) a number of spaces
(ii) a number of spaces...
-
Accessible Ground Surfaces
Accessible Ground Surfaces Ground surfaces along accessible routes, clear floor or ground spaces, and maneuvering spaces, must comply with the American Society for Testing and Materials...
-
Auxiliary Alarms [4.28.4]
Auxiliary Alarms [4.28.4] A portion of sleeping units in transient lodging facilities, including those required to be accessible to persons who use wheelchairs, must have a visual alarm...
-
11B-216.4.2 Areas of refuge and exterior areas for assisted rescue
Signs required by Chapter 10, Section 1009.11 to provide instructions in areas of refuge shall comply with Section 11B-703.5 _|Signs; Visual Characters|_....
-
4.3.3 Clear Floor Area
4.3.3 Clear Floor Area Clear floor area dimensions are the basis for the minimum required size of spaces used by wheeled mobility users (e.g. platform/wheelchair lifts) and for spaces...
-
Vertical Dispersion: ADA Standard Section 221.2.3.2
Section 221.2.3.2 covers scoping requirements in the current ADA Standards for vertical dispersion in assembly areas.
-
11B-813.2.9 Overlap
Required clear floor spaces, clearance at fixtures, and turning space shall be permitted to overlap....
-
603.2.3 Door Swing
Doors shall not swing into the clear floor space or clearance required for any fixture. Doors shall be permitted to swing into the required turning space. EXCEPTIONS: 1....
-
503.2 Vehicle Pull-Up Space
Passenger loading zones shall provide a vehicular pull-up space 96 inches (2440 mm) wide minimum and 20 feet (6100 mm) long minimum....
