Door and gate spring hinges shall be adjusted so that from the open position of 70 degrees, the door or gate shall move to the closed position in 1.5 seconds minimum....
Search Results "Height Adjustable"
-
11B-404.2.8.2 Spring hinges
-
Executive Summary
However, Committee members failed to agree upon the recommended lowest or minimum height for adjustable-height transfer surfaces....
-
11B-809.8 Doors
., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than 1/2 inch (12.7 mm) of change in height between floor surfaces....
-
11B-809.9.5 Lower shelving
Lower shelving and/or drawer space shall be provided at a height of 48 inches (1219 mm) maximum above the finish floor....
-
11B-809.9.5 Lower shelving
Lower shelving and/or drawer space shall be provided at a height of 48 inches (1219 mm) maximum above the finish floor....
-
1630.2(o)(1)(II)
(II) Modifications or adjustments to the work environment, or to the manner or circumstances under which the position held or desired is customarily performed, that enable a qualified individual...
-
502.4 Platform Accessibility Features
Section 9.3.4 Provide adjustment of delay before key acceptance; C. Section 9.3.5 Provide adjustment of same-key double-strike acceptance; D....
-
502.4 Platform Accessibility Features
Section 9.3.4 Provide adjustment of delay before key acceptance. 3. Section 9.3.5 Provide adjustment of same-key double-strike acceptance. 4....
-
Pictogram Field: ADA Standard Section 703.6.1
Pictograms shall have a field height of 6 inches (150 mm) minimum. Characters and braille shall not be located in the pictogram field....
-
§1630.2(o)(1)(ii)
(ii) Modifications or adjustments to the work environment, or to the manner or circumstances under which the position held or desired is customarily performed, that enable an individual...
-
404.2.8.1 Door Closers and Gate Closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
404.2.8.2 Spring Hinges
Door and gate spring hinges shall be adjusted so that from the open position of 70 degrees, the door or gate shall move to the closed position in 1.5 seconds minimum....
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
GPK UPPERTONE Unassisted Muscle Strengthening System for Quadriplegics
This allows quads to make all necessary adjustments, such as station height, station width, and resistance, unassisted....
-
vii. Ancillary equipment
Ancillary equipment Ancillary equipment is equipment used with other medical equipment, such as examination tables or chairs or MRIs, and adapted to or adjustable for use by individuals...
-
What is Reasonable Accommodation?
Reasonable accommodation is any change or adjustment to a job or work environment that permits a qualified applicant or employee with a disability to participate in the job application process...
-
413.1.1 Caption Controls (Section-by-Section Analysis)
413.1.1 Caption Controls (Section-by-Section Analysis) This proposed section would require that, where video-capable hardware provides physical volume adjustment controls, such ICT must...
-
Issue 1: APS volume
Volume adjustments differ by manufacturer: some devices can be set through a hand-held PDA, while others require adjusting set screws on a control board mounted in the pedestrian signal...
-
1132A.3 Width and height of interior doors and secondary exterior doors
Doors shall comply with the following:
-
Swimming Pools, Wading Pools & Spas
Word Fillable Form (2.8MB) Word Non-Fillable Form (2.6MB) PDF Non-Fillable Form (1.0MB)
-
11B-705.1.1.1 Dome size
warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and 0.47 inch (11.9 mm) maximum, and a height...
-
11B-705.1.1.1 Dome size
warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and 0.47 inch (11.9 mm) maximum, and a height...
-
§ 1194.23(f)
(f) For transmitted voice signals, telecommunications products shall provide a gain adjustable up to a minimum of 20 dB. ...
