stain colors or unfinished poplar Coated with a low-VOC UV-protective clear finish Coordinate with Northern Hardwoods chair rails Meet safety codes with ADA and ANSI compliance Rear...
Search Results "Rear Grab Bar"
Commonly Searched Documents
- Inpro Corporation IPC® HR9 Northern Hardwoods® Real Wood Handrail
- American Standard Ovalyn™ Universal Access Undercounter Sink
-
1008.3.2.3 Transfer Supports
Some examples of supports include a rope loop, a loop type handle, a slot in the edge of a flat horizontal or vertical member, poles or bars, or D rings on the corner posts....
-
11B-104.1.1 Construction and manufacturing tolerances
Where the requirement states a specified range, such as in Section 11B-609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate...
-
ASME
The enclosure walls not used for entry or exit are required to have a grab bar the full length of the wall on platform lifts....
-
III-7.8200 Restaurants and cafeterias
ADAAG contains requirements for counters and bars, access aisles, food service lines, tableware and condiment areas, raised speaker's platforms, and vending machine areas (but not controls...
-
Clear Floor Space: Minimum Clear Floor Space Required for Forward and Side Approach - Manual Wheelchair
points of the wheelchair or occupant on the right and left side; (B) occupied length, the horizontal distance from the front-most (anterior-most) point of the wheelchair or occupant to the rear-most...
-
Clear Floor Space: Minimum Clear Floor Space Required for Forward and Side Approach - Scooter
points of the wheelchair or occupant on the right and left side; (B) occupied length, the horizontal distance from the front-most (anterior-most) point of the wheelchair or occupant to the rear-most...
-
Clear Floor Space: Minimum Clear Floor Space Required for Forward and Side Approach - Power Chair
points of the wheelchair or occupant on the right and left side; (B) occupied length, the horizontal distance from the front-most (anterior-most) point of the wheelchair or occupant to the rear-most...
-
Measuring Door Openings
Door handles and push bars should not be included in the measurements of door opening widths....
- Midmark 623 Barrier-Free® Power Examination Table
- GE Artistry™ Series 30" Free-Standing Electric Range ABS45DFWS
-
902.1 General
Dining surfaces include, but are not limited to, bars, tables, lunch counters, and booths....
-
902.1 General
Dining surfaces include, but are not limited to, bars, tables, lunch counters, and booths....
- Aluminum Heavy Duty Wheels n' Heels® Metro Grating
- Aluminum Dove Tail Series Pressure-Locked Grating
-
1133B.2.5.2
Latching and locking doors that are hand-activated and which are in a path of travel shall be operable by lever-type hardware, panic bars, push-pull activating bars, U-shaped handles or...
- Kompan, Inc. Vega GXY8017
- Seton EZ-Roll Sign Stanchion Systems - Parking Sign PP244
-
3. Buttock-Popliteal Length
Buttock-Popliteal Length For this study, an estimate of buttock-popliteal length was calculated as the horizontal distance from the proximal (rear) edge of the wheelchair seat cushion...
-
5.8.1 Wheelchair Spaces on Raised Platforms Recommendations
Where wheelchair spaces can be entered from the front or rear, the wheelchair space shall be 48 inches deep minimum....
-
Utility and Sewage Hookups [1011.2, 1011.3, and 1011.6]
The clear ground space must be designed so that the hookups are located at the rear center of the space....
-
ROUNDABOUT OVERVIEW
placing the crosswalk at the edge of the inscribed circle (juxtaposed to the circular roadway) would expose pedestrians to nearly continuous traffic that approaches from both the side and rear...
- Hill-Rom Sabina® II Mobile Lift