Section 703.5 provides specifications for visual characters which address finish and contrast, case, style, character proportions and height, height, stroke thickness, and character and...
Search Results "Non-Glare Finish"
-
Visual Characters
-
R210.3 Shared Use Paths
Objects shall not overhang or protrude into any portion of a shared use path at or below 2.4 m (8.0 ft) measured from the finish surface....
-
Clear Floor Space [4.16.2]
doors cannot swing into the clear floor space required at any fixture the 18 inch water closet centerline is absolute The 18 inch dimension is measured from the finished...
-
III-7.5165 Signage
. , men's and women's rooms, room numbers, exit signs) must have raised and Brailled letters; must comply with finish and contrast standards; and must be mounted at a certain height and...
-
TEST NO. 3 – UNUSUAL CHARACTERISTICS TEST
The original site characteristics result in a difference in finished grade elevation exceeding 30 inches (762 mm) and 10 percent measured between an entrance and all vehicular or pedestrian...
-
11B-608.3 Grab bars
Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor....
-
3) Signs
3) Signs ADAAG: * Signs designating permanent rooms and spaces (men's and women's rooms; room numbers; exit signs) must have raised and Brailled letters; must comply with finish and...
-
TEST NO. 3 – UNUSUAL CHARACTERISTICS TEST
An accessible route to a building entrance is impractical due to unusual characteristics of the site when: The original site characteristics result in a difference in finished grade...
-
11B-809.10.7.3 Reinforcement for grab bars
Where reinforcement is installed at the back, it shall be installed between 30 inches (762 mm) maximum and 38 inches (965 mm) minimum above the finish floor....
-
11B-809.12 Electrical receptacles, controls and switches
Where there is no obstruction, 48 inches (1219 mm) maximum measured from the top of the receptacle box and 15 inches (381 mm) minimum measured from the bottom of the receptacle box to the finish...
-
11B-608.3 Grab bars
Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor....
-
Smith Carrel Hi-Lo Study Carrel - "The Original"
Product Specifications - Hi-Lo Carrel Series Surface and Panels Are 3/4" thick solid core construction in low glare thermofused melamine laminate with PVC ege banding....
-
When is a Curb Ramp a Ramp?
Non Compliant Sloped Walk? Compliant Curb Ramp? Or Non-Compliant Ramp?. ...
-
5 Key Warranty Features to Compare Before Hiring a Roofer
Second, check for non-prorated coverage. Many warranties lose value over time, meaning if your roof fails in year 15, the company might only pay 40% of the replacement cost....
-
Re: Pure Sniper Free Gold and Cash, My New Tips
Your goal should be to get it to the finish line while avoiding the obstacles that are on the road, which have the potential to immediately demolish your iconic cube....
-
608.4 Seats
A folding or non-folding seat shall be provided in transfer type shower compartments....
-
407.4.8.2.1 Signal Type
[ECTCR UFAS 4.10.13] EXCEPTION: For elevators other than destination-oriented elevators that have a rated speed of 200 feet per minute (1 m/s) or less, a non-verbal audible signal with...
-
R302.7.4 Flangeway Gaps
Flangeway gaps at pedestrian at-grade rail crossings shall be 64 mm (2.5 in) maximum on non-freight rail track and 75 mm (3 in) maximum on freight rail track....
-
R103.3 Units of Measurement
Combining values from the two systems may result in non-compliance....
-
E202.6.1 Required Documentation
The Federal Acquisition Regulation (FAR) sets forth the documentation requirements for a determination of commercial non-availability by federal agencies subject to 508 requirements....
-
13.18 Quality Assurance Inspections
previously-identified standards issues) utilizing each Brand’s quality assurance checklists to verify appearance of items that can be checked in an average half-day review with a visible, non-intrusive...
-
Handrail Clearance and Cross Section [§505.5, §505.7]
Handrails can have circular or non-circular cross-sections, but must have rounded edges. The gripping surface and adjacent surfaces must be free of abrasive or sharp elements....
-
11B-812.7.1 Location
Exception: Where four or fewer total EVCS are provided within a facility, the access aisle for non-angled van accessible spaces may be located on either the driver or passenger side of the...
