Kitchens shall have a minimum clear width measured between any cabinet, work surface or the face of any appliance (excluding handles and controls) and the opposing cabinet, work surface,...
Search Results "Mitigating Measures"
-
11B-809.9.2 Clear width
-
ASTM
ASTM F 1292 establishes a uniform means to measure and compare characteristics of surfacing materials to determine whether materials provide a safe surface under and around playground equipment...
-
ASTM
ASTM F 1292 establishes a uniform means to measure and compare characteristics of surfacing materials to determine whether materials provide a safe surface under and around playground equipment...
-
5.8.2.5 Toe Height Recommendation
5.8.2.5 Toe Height Recommendation The Committee recommends increasing the toe height to 18 inches minimum, measured above the ground when the top of the breast platform is 34 inches above...
-
Acceptable Trail Surfacing Requirements
These three criteria have not been defined adequately within the ADA Accessibility Guidelines for quantitative measurement on any specific surface....
-
Step 3: Apply the Accessibility Provisions
If the grade requirement can't be met because of a condition for an exception, measure and record the length of trail that will deviate from the technical requirement....
-
2.2.2.2 New York State Standards
Measurements shall be made in the center of the neckloop....
-
3.3.4 Clear Floor Length
The difference between the maximum length in the UDI and Seeger studies and the others is so great that they are probably due to the presence of unusually large people and/or devices, or measurement...
-
Station 3-Turning Radii
The extent of the lean, as measured from the perpendicular, is the lean angle....
-
4.3.5.1 90-Degree Turn
Findings from the Anthropometry of Wheeled Mobility Study indicate that a width of at least 85 cm (33 in.) was required for 50% of the manual and power wheelchair users measured in this...
-
Examination Tables
Treatment tables typically have a fixed height of 31 inches measured from the floor to the top of the table. The lower cost products have an open base with an H-brace or shelf....
-
M303.2.3 Wheelchair Spaces / Depth of Wheelchair Spaces for front or Rear Entry
(Figure 1 –Clear Platform showing the measurements of 32” wide x 40” inches length Rationale: Clear platform size of 32 inchesminimum width x 40 inches minimum length accommodates non-powered...
-
Observations and Results
Accessibility Measures During the 10-month period of the test, firmness and stability of the SEWF surfaces were measured with the rotational penetrometer (Figs. 12 and 13, respectively...
-
Premium Quality Chocolate Chips Manufacturer
Each batch is processed in a hygienic facility with strict quality control measures to guarantee purity, texture, and uniform size....
-
AJW Architectural Products U155 24 oz. Vertical Liquid Soap Dispenser - Surface Mounted
Dispenses pre-measured amounts of soap to prevent waste. Valve will dispense most liquids and lotions....
-
Better Living LINEA Luxury Double Dispenser
prevents chambers from being accidentally bumped off bracket 2 and 3 chamber models include stainless steel storage hooks Rust-proof solid metal features Pump pre-measures...
-
Tork Elevation® Xpress® Mini Hand Towel Dispenser, White
Measuring just 12 inches high, the Xpress™ Mini is perfect for wall areas where space is at a premium....
-
5.2.1.1 Transfer Surface Width Recommendations for M301
Inclusive Design and Environmental Access at the University of Buffalo, gave a presentation on the Wheeled Mobility Anthropometry Project (AWM Project).GG He provided a brief analysis of measurements...
-
B. Survey and Review of Polling Place Locations
each newly proposed polling place location to determine whether it is accessible to persons with disabilities or could be made accessible on Election Day through the use of the remedial measures...
-
The Target Population
If they were measured in proportion to their representation in the military, and then the product or workspace design were created to accommodate the 5th percentile through the 95th percentile...
-
Test Courses & Surfaces
The test surfaces were objectively measured using the Wheelchair Work Measurement Method and the portable Rotational Penetrometer....
-
1134A.6 Showers
The shower stall shall measure at least 42 inches wide by 48 inches deep (1067 mm by 1219 mm) with an entrance opening of at least 36 inches (914 mm); or 1.2. ...
-
A. Accessible Voting Program
For all elections occurring after the Effective Date of this Agreement, Harris County will implement measures to remediate the violations previously identified by the United States in its...
-
Executive Order 13132: Federalism
Some elements of the proposed rules reflect the Department's work to mitigate federalism implications, particularly the provisions that streamline the administrative process for state and...
