If gangways (only one end of route is attached to land) and floating piers (neither end is attached to land) are involved, a number of exceptions are provided from the general standards...
Search Results "Head End Wall"
Filters
Commonly Searched Documents
-
Boating facilities. (Section-by-Section Analysis)
-
502.3 Accessibility Services (Section-by-Section Analysis)
A documented set of accessibility services is important to end-users because, without them, developers are likely to provide inconsistent access to assistive technology, thereby leaving...
-
1011.5 Fire Rings, Grills, Fireplaces, and Wood Stoves
Fire rings with double walls or insulation on the sides are recommended to prevent burns....
-
4. Faucet Controls
Are the faucet controls and shower wand positioned on the wall along the side of the shower seat so they are operable from the folding shower seat or from the shower wheelchair?...
-
D. Toilet Centerline
Is each accessible toilet centered 18" from the adjacent side wall, which is the distance that will permit a person with a mobility impairment to use the grab bars?...
-
1011.5 Fire Rings, Grills, Fireplaces, and Wood Stoves
Fire rings with double walls or insulation on the sides are recommended to prevent burns....
-
4.34.6.1* CLEARANCE
Clearances between all opposing base cabinets, counter tops, appliances, or walls shall be 40 in (1015 mm) minimum, except in U-shaped kitchens, where such clearance shall be 60 in (1525...
-
Stabila, Inc. Magnetic Tech Digital Electronic Level Type 96M-2
Electronic measuring technology / Two digital displays / Audible inclination guide / IP 65 Dust and Waterproof / Rare earth magnets for hands free use / Removable shock-absorbing end caps...
-
Feature 2 - Routes to the Building Entrance
Therefore, objects that do not provide sufficient head clearance or that are mounted too high and protrude into a route can become hazards because they cannot be detected by people who are...
-
804.2.2 U-Shaped
In U-shaped kitchens enclosed on three contiguous sides, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work areas shall be 60 inches (1525...
-
2e
Is there a horizontal grab bar along each of the three shower walls at 33"-36" above the floor as shown in Figure 37(b) below?...
-
5. Grab Bar
Is there a horizontal grab bar on the wall alongside the shower seat (but not behind the shower seat) for stabilization and aid in transfer from a wheelchair to the folding shower seat?...
-
H16
Is the toilet stall at least 60 inches wide and 56 inches deep (wall mounted toilet) or 59 inches deep (floor mounted toilet)?...
-
11B-604.8.2.3 Grab bars
A side-wall grab bar complying with Section 11B-604.5.1 shall be provided on both sides of the compartment. FIGURE 11B-604.8.2 ‡‡ AMBULATORY ACCESSIBLE TOILET COMPARTMENT...
-
4.8.7 Edge Protection
Ramps and landings with drop-offs shall have curbs, walls, railings, or projecting surfaces that prevent people from slipping off the ramp....
-
Back Entry
Glass walls and ceiling to improve visual acuity Recessed area rug Grill in the fireplace for year round healthy cooking Automatic opener which can be operated...
-
4.8.7 EDGE PROTECTION
Ramps and landings with drop-offs shall have curbs, walls, railings, or projecting surfaces that prevent people from slipping off the ramp....
-
11B-804.2.2 U-Shaped
In U-shaped kitchens enclosed on three contiguous sides, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work areas shall be 60 inches (1524...
-
11B-809.10.6.3 Floor space
A clear maneuvering space 30 inches (762 mm) wide minimum by 48 inches (1219 mm) minimum in length shall be located outside the shower, with the width flush with the control wall and the...
-
Hager Companies Round Push/Pull Bar Set 157D-V-B
Round Push/Pull Bar Set 157D-V-B D = Standard Fastening: - One (1) Type 7 spanner collar connection between push bar and pull plus two (2) Type 1 connections for other ends of...
-
Hager Companies Round Push/Pull Bar Set 164D-V-B
Round Push/Pull Bar Set 164D-V-B D = Standard Fastening: - One (1) Type 7 spanner collar connection between push bar and pull plus two (2) Type 1 connections for other ends of...
-
Hager Companies Round Push/Pull Bar Set 161D-V-B
Round Push/Pull Bar Set 161D-V-B D = Standard Fastening: - One (1) Type 7 spanner collar connection between push bar and pull plus two (2) Type 1 connections for other ends of...
-
Hager Companies Round Push/Pull Bar Set 152D-V-B
Round Push/Pull Bar Set 152D-V-B D = Standard Fastening: - One (1) Type 7 spanner collar connection between push bar and pull plus two (2) Type 1 connections for other ends of...
