The bench shall provide for back support or shall be affixed to a wall along its long dimension....
Search Results "Head End Wall"
Filters
Commonly Searched Documents
-
11B-903.4 Back support
-
11B-903.4 Back support
The bench shall provide for back support or shall be affixed to a wall along its long dimension....
-
11B-703.4.2 Location
Where there is no wall space at the latch side of a single door or at the right side of double doors, signs shall be located on the nearest adjacent wall....
-
11B-703.4.2 Location
Where there is no wall space at the latch side of a single door or at the right side of double doors, signs shall be located on the nearest adjacent wall....
-
11B-703.4.2 Location
Where there is no wall space at the latch side of a single door or at the right side of double doors, signs shall be located on the nearest adjacent wall....
-
Access CommunicationsTM Consulting Services
obvious that sign companies were going to have many questions about what the ADA Accessibility Guidelines meant, and how to translate them into actual signs that could be installed on walls...
-
Willoughby Industries ETW-1490-FM-HC Floor Mount Wall Outlet Rear Mounted ADA Blow Out Type Flush Toilet
Fixture shall be fabricated from 14 gauge, type 304 stainless steel. The construction shall be all welded, with exposed stainless surfaces polished to a #4 satin finish. Standard...
-
5. Toilet centerline
Toilet centerline: The toilet bowl needs to be centered 18 inches from the side wall, so that inmates with disabilities can use the side grab bar....
-
11B-604.8.2.3 Grab bars
A side-wall grab bar complying with Section 11B-604.5.1 shall be provided on both sides of the compartment....
-
3. Identifying other barriers to access
By using the resources listed at the end of this Chapter, you can learn to identify and address other barriers....
-
Tactile Graphics
Tactile Graphics The use of tactile graphics requires a connection and context to the interpretive story in order to make sense to the end user....
-
903.4 Back Support
The bench shall provide for back support or shall be affixed to a wall....
-
903.4 Back Support
The bench shall provide for back support or shall be affixed to a wall....
-
11B-604.8.1.2 Doors
Doors shall be located in the front partition or in the side wall or partition farthest from the water closet....
-
Pilot Rock T-600 Series Caterpillar Picnic Table
These tables provide ADA Compliant wheelchair access at both ends. ...
-
BEA Inc. LPR36 Series 36" Low Profile Push Plate
“All-active” faceplate allows activation from any angle Listed under UL325 for both US and Canada Exceeds the California Building Code: Section 1117B.6 Can be mounted to either a wall...
-
Portable Floor Lifts
A lift’s base may fit around the bottom end of an exam table, or fit fully or partially under the table at a perpendicular angle to the table....
-
TownSteel THSP179 Standard Duty Spring Hinge
Material Gauge - .134 Adjustable Spring Tension Screw packages - 1/2 Machine Screws (1/2MS) and - All Wood Screws (AWS) Machine screws - Phillips(#3) Flat-head...
-
11B-608.10 Soap dish
Where a soap dish is provided, it shall be located on the control wall at 40 inches (1016 mm) maximum above the shower floor, and within the reach limits from the seat....
-
704.6 Structural stability
The wall shall extend to the height required by Section 704.11 and shall have sufficient structural stability such that it will remain in place for the duration of time indicated by the...
-
609.5 Surface Hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
4.34.6.4(2)
The finished floor shall extend under the counter to the wall....
-
Non-Circular Cross Section and Clearance (§505.5, §505.7)
Keep wall surfaces above handrails free of any protrusions....
-
11B-602.8 Depth
Wall- and post-mounted cantilevered drinking fountains shall be 18 inches (457 mm) minimum and 19 inches (483 mm) maximum in depth....
