Similarly, accessible toilet stalls, dressing rooms, or counters at a cash register must not be cluttered with merchandise or supplies....
Search Results "Counter Length"
-
Accessible Route to Goods and Services
-
205 and 309 Operable Parts
The 2010 Standards also add exceptions that exempt certain outlets at kitchen counters; heating, ventilating and air conditioning diffusers; redundant controls provided for a single element...
-
Technical Memorandum TM 2013-23 Storage (Not in Kitchens or Kitchenettes)
Counter surfaces shall not be considered a type of storage nor be used to satisfy the requirements of TAS 225.2....
-
a) Aquatic Program
pools have the features necessary to provide program access, namely: (1) an accessible route from the property line to the building; (2) an accessible entry; (3) an accessible check-in counter...
-
Alterations
Examples include restriping a parking lot, moving walls, moving a fixed ATM to another location, installing a new service counter or display shelves, changing a doorway entrance, or replacing...
-
Common Use Circulation Paths in Employee Work Areas
• Common use circulation paths within employee work areas that are less than 1,000 square feet and are defined by permanently installed partitions, counters, casework, or furnishings...
-
A. Executive Order 12866 (Regulatory Planning and Review), Executive Order 13563 (Improving Regulation and Regulatory Review), and DOT Regulatory Policies and Procedures
accessibility requirements also include an enhanced sense of inclusion for travelers with vision or mobility disabilities, as well as a decrease in the stigma of special treatment at the ticket counter...
-
5. Voice Carryover and Hearing Carryover
These types of communication can shorten the length of calls that would otherwise be conducted exclusively by typing....
-
11B-405.8 Handrails
At door landings, handrails are not required on ramp runs less than 6 inches (152 mm) in rise or 72 inches (1829 mm) in length....
-
302.2 Carpet
Exposed edges of carpet shall be fastened to floor surfaces and shall have trim on the entire length of the exposed edge. Carpet edge trim shall comply with 303....
-
1007.2 Accessible Routes
Ramp landing length specified by 405.7.3 shall be permitted to be 48 inches (1220 mm) long minimum. 6....
-
Benches [1011.2]
Although there are no technical requirements for the bench itself, providing a bench with at least one armrest and back support that runs the full length of the bench is helpful to people...
-
Parallel Curb Ramps (R304.3) (Section-by-Section Analysis)
A minimum running slope of 5 percent and a maximum running slope of 8.3 percent are specified for parallel curb ramps, and the ramp length is limited to 4.5 meters (15 feet)....
-
Redundant alt-text (now hear this… twice)
There is a long handle running the length of Pastel’s back. This is the handle that the handler uses to follow Pastel’s movements....
-
1134A.7, Item 2
The backing shall be a minimum of 40 inches (1016 mm) in length....
-
Recessed Lavatories
In-swinging doors must clear fixture clearances and door clearances must clear the water closet fixture (verify toilet length)....
-
F216.13 Trailhead Signs
The technical requirements in 1017.11 require the signs to include information on the length of the trail or trail segment; surface type; typical and minimum tread width; typical and minimum...
-
Clear Floor Space: Minimum Clear Floor Space Required - Manual, Power & Scooter
Dimensions are based on length and width measurements obtained from occupied wheeled mobility devices as part of the Anthropometry of Wheeled Mobility Study....
-
Suggestion by Eldon Tipping
The minimum length of measurement lines perpendicular to the slope were to be one column bay....
-
1134A.7, Item 2
The backing shall be a minimum of 40 inches (1016 mm) in length....
-
Individual with a Disability
This concept is more important in employment and public accommodations contexts than it is in transportation, and is discussed at greater length in the DOJ and EEOC rules....
-
11B-405.8 Handrails
At door landings, handrails are not required on ramp runs less than 6 inches (152 mm) in rise or 72 inches (1829 mm) in length....
-
11B-405.8 Handrails
At door landings, handrails are not required on ramp runs less than 6 inches (152 mm) in rise or 72 inches (1829 mm) in length....
-
1007.2 Accessible Routes
Ramp landing length specified by 405.7.3 shall be permitted to be 48 inches (1220 mm) long minimum. 6....