Amusement rides shall provide at least one wheelchair space complying with Section 11B-1002.4, or at least one amusement ride seat designed for transfer complying with Section 11B-1002.5...
Search Results "Designated Aisle Seat (Assembly)"
-
11B-234.3 Minimum number
-
4.33.6* Placement of Listening Systems
If the listening system provided serves individual fixed seats, then such seats shall be located within a 50 ft (15 m) viewing distance of the stage or playing area and shall have a complete...
-
4.33.6* PLACEMENT OF LISTENING SYSTEMS
If the listening system provided serves individual fixed seats, then such seats shall be located within a 50 ft (15 m) viewing distance of the stage or playing area and shall have a complete...
-
7.3(2)
(2) Clear aisle width for accessible check-out aisles shall comply with 4.2.1 and maximum adjoining counter height shall not exceed 38 in (965 mm) above the finish floor....
-
TACTILE SIGN
TACTILE SIGN. A sign containing raised characters and/or symbols and accompanying Braille.
-
Solutions to Enhance Wayfinding (slides 8 -15)
[See subsections ...]
-
Exterior Features
Glass garage and barn doors for extra light without extra energy use. Preheated hot water from solar panels for water heater, spa, radiant heating. Greenhouses...
-
Study Questions
Study Questions The purpose of this study was to evaluate a variety of playground surfaces, their ability to meet accessibility requirement, their costs upon initial installation...
-
Selection of Playgrounds
Selection of Playgrounds Newly constructed public playgrounds were selected for participation as test sites in the study. A purposive snowball sampling technique was used to...
-
2.1.1
2.1.1 Clearly state the required installed tolerances for critical construction elements. In most cases, it is best to refer to industry standard tolerances or other industry...
-
2.1.2
2.1.2 State the required tolerances for elements for which there are no industry standards. These may also include elements for which there is an industry tolerance for one aspect of...
-
2.4.1
2.4.1 Based on the methods for measuring compliance, define what remedial actions are acceptable when construction elements exceed tolerances. These may include total replacement,...
-
2.3.2
2.3.2 Define the measurement tools that should be used. The acceptable tools should be selected based on the accuracy required and a reasonable balance between the accuracy of the...
-
2.1.3
2.1.3 State requirements for critical accumulated tolerances. These are instances where individual products and installation procedures may conform to industry standard tolerances...
-
TACTILE SIGN
A sign containing raised characters and/or symbols and accompanying Braille.
-
TACTILE SIGN
A sign containing raised characters and/or symbols and accompanying Braille.
-
The Centre for Excellence in Universal Design
The Centre is dedicated to the principle of universal access, enabling people in Ireland to participate in a society that takes account of human difference and to interact with their...
-
Floor or Ground Surface: ADA Standard Section 802.1.1
The floor or ground surface of wheelchair spaces shall comply with 302. Changes in level are not permitted. EXCEPTION: Slopes not steeper than 1:48 shall be permitted.
-
11B-904.3.4 Identification sign
When not all check-out aisles are accessible, accessible check-out aisles shall be identified by a sign clearly visible to a person in a wheelchair displaying the International Symbol of...
-
11B-904.3.4 Identification sign
When not all check-out aisles are accessible, accessible check-out aisles shall be identified by a sign clearly visible to a person in a wheelchair displaying the International Symbol of...
-
11B-904.3.4 Identification sign
When not all check-out aisles are accessible, accessible check-out aisles shall be identified by a sign clearly visible to a person in a wheelchair displaying the International Symbol of...
-
4.6.3* Parking Spaces
Parking access aisles shall be part of an accessible route to the building or facility entrance and shall comply with 4.3....
-
Van Space: Wider Parking Space
Van Space: Wider Parking Space Recommendation: Sizing all accessible spaces (or access aisles) for van accessibility provides greater convenience and helps ensure that van...
-
Contrast and wayfinding, short-term and long-term
It was a matter of the design team relooking at a problem and coming up with design solutions; [to assure] that many of the decisions that they were making were not made to be barriers to...
