[See subsections ...]
Search Results "Bus Boarding Area"
-
11B-235 Recreational boating facilities.
-
11B-235.1 General
Recreational boating facilities shall comply with Section 11B-235.
-
§ 37.42(e)
(e) In any situation using a combination of high and low platforms, a commuter or intercity rail operator shall not employ a solution that has the effect of channeling passengers...
-
11B-235.1 General
Recreational boating facilities shall comply with Section 11B-235.
-
11B-235 Recreational boating facilities
[See subsections ...]
-
F246.2 Distinct Viewing Locations
This section requires each distinct viewing location within a viewing area to comply with the technical requirements for viewing areas in 1015....
-
F218.4 Other Transportation Facilities
In other transportation facilities, public address systems shall comply with 810.7 and clocks shall comply with 810.8.
-
218.5 Other Transportation Facilities
In other transportation facilities, public address systems shall comply with 810.7 and clocks shall comply with 810.8.
-
T213.3 Armrests at Aisle Seats on Over-the-Road Buses
Where armrests are provided on the aisle side of seats on over-the-road buses, folding or removable armrests shall be provided on the aisle side of at least 50 percent of aisle...
-
218.5 Other Transportation Facilities
218.5 Other Transportation Facilities. In other transportation facilities, public address systems shall comply with 810.7 and clocks shall comply with 810.8.
-
§ 37.33 Airport transportation systems
[See subsections ...]
-
11B-218.5 Other transportation facilities
In other transportation facilities, public address systems shall comply with Section 11B-810.7 and clocks shall comply with Section 11B-810.8.
-
§ 38.159(b)(6) Platform surface
(6) Platform surface. The platform surface shall be free of any protrusions of 1/4 inch (6.5 mm) high and shall be slip resistant. The platform shall have a minimum clear width of 28...
-
§ 38.159(c)(2) Ramp surface
(2) Ramp surface. The ramp surface shall be continuous and slip resistant; shall not have protrusions from the surface greater than 1/4 inch (6.5 mm) high; shall have a clear width...
-
(1)(d)
(d) Faucets and flush controls should be operable with one hand and should not require tight grasping, pinching, or twisting of the wrist. The force required to activate controls...
-
§ 38.159(d)(3) Mobility aids accommodated
(3) Mobility aids accommodated. The securement system shall secure common wheelchairs and mobility aids and shall either be automatic or easily attached by a person familiar with the...
-
11B-218.5 Other transportation facilities
In other transportation facilities, public address systems shall comply with Section 11B-810.7 and clocks shall comply with Section 11B-810.8.
-
Access Board: Automatic Door Controls
Access Board. View the animation video in its entirety on the Access Board's website here: https://www.access-board.gov/images/videos/doors-captioned.mp4...
-
Access Board: Accessible Route Carpet
Access Board. View the animation video in its entirety on the Access Board's website here: https://www.access-board.gov/images/videos/wcmaneuvering-captioned.mp4 ...
-
§100.205(c)(1)
(1) The public and common use areas are readily accessible to and usable by handicapped persons;...
-
1009.6.4 Separation
Each area of refuge shall be designed to minimize the intrusion of smoke....
-
1009.6.4 Separation
Each area of refuge shall be designed to minimize the intrusion of smoke. Exceptions: 1....
-
216.4.2 Areas of Refuge
Code (2000 edition) or section 1007.6.4 of the International Building Code (2003 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1) to provide instructions in areas...
-
11B-206.2.1 Site arrival points
Where two or more similar site arrival points, such as bus stops, serve the same accessible entrance or entrances, both bus stops must be on accessible routes....
