Biometrics shall not be the only means for user identification or control....
Search Results "Door Control"
Commonly Searched Documents
-
403.1 General
-
I2
Does the phone have volume controls? [ADA Standards § 4.31.5] Yes No...
-
407.4.7.1.1 Type
Control buttons shall be identified by tactile characters complying with 703.2....
-
7c.
Is there clear maneuvering floor space in front of each accessible door (see Figure 25 in the appendix for measurements) and on the pull side, is there at least 18 inches clear floor space...
-
11B-602.3 Operable parts
shall be activated by a manually operated system that is front mounted or side mounted and located within 6 inches (152 mm) of the front edge of the fountain or an automatic electronically controlled...
- Panda S.66 Solid Wood Folding Door System
- Panda S.51 All Aluminum Folding Door System
- Allegion Falcon SC80 Series Surface Mounted Door Control
-
Clear Width [4.13.5] and Vertical Clearance
Clear Width [4.13.5] and Vertical Clearance The clear width of the opening is measured from the face of the door in a 90 degrees open position to the opposite stop....
- LaCantina Doors Industrial Commercial - Best in Show Award Chicago AIA
-
11B-608.5.2 Standard roll-in type shower compartments
In standard roll-in type shower compartments, the controls, faucets, and the shower spray unit shall be located on the back wall of the compartment adjacent to the seat 16 inches (406 mm...
-
Input: ADA Standard Section 707.6
Input devices shall comply with 707.6.
-
Operable Parts: ADA Standard Section 602.3
Section 602.3 covers the current ADA Standards for the operable parts of drinking fountains.
-
4.31.5* EQUIPMENT FOR HEARING IMPAIRED PEOPLE
Volume controls shall be provided in accordance with 4.1.2....
-
409.3.1 Power Operation
Elevator car and hoistway doors and gates shall be power operated and shall comply with ANSI/BHMA A156.19 (1997 or 2002 edition) (incorporated by reference, see "Referenced Standards" in...
-
11B-407.4.7.1.5 Button spacing
A minimum clear space of 3/8 inch (9.5 mm) or other suitable means of separation shall be provided between rows of control buttons....
-
11B-411.4.6.2 Buttons
Car control buttons shall comply with Sections 11B-407.4.6.2.1 and 11B-407.4.6.2.4. The car shall not have non-functional, exposed floor buttons....
-
4.6.2 Operable Parts
Controls and operating mechanisms for telescopes and periscopes that are useable from a seated position shall comply with the operable parts requirements in sections 308 and 309.4 of the...
-
11B-407.4.7.1.5 Button spacing
A minimum clear space of 3/8 inch (9.5 mm) or other suitable means of separation shall be provided between rows of control buttons....
-
11B-411.4.6.2 Buttons
Car control buttons shall comply with Sections 11B-407.4.6.2.1 and 11B-407.4.6.2.4. The car shall not have non-functional, exposed floor buttons....
-
11B-407.4.7.1.5 Button spacing
A minimum clear space of 3/8 inch (9.5 mm) or other suitable means of separation shall be provided between rows of control buttons....
-
11B-411.4.6.2 Buttons
Car control buttons shall comply with Sections 11B-407.4.6.2.1 and 11B-407.4.6.2.4. The car shall not have non-functional, exposed floor buttons....
- LaCantina Multi-slide Thermally Controlled Aluminum Sliding Door System
-
Thresholds [§404.2.5]
These requirements apply to all types of doors required to comply, including sliding doors. Threshold Profile...