Where the structural or operational characteristics of an amusement ride are altered to the extent that the amusement ride’s performance differs from that specified by the manufacturer or...
Search Results "BHMA: Builders Hardware Manufacturers Association"
-
11B-234.4.2 Minimum number
-
11B-234.4.2 Minimum number
Where the structural or operational characteristics of an amusement ride are altered to the extent that the amusement ride’s performance differs from that specified by the manufacturer or...
-
Operable Parts [§309]
are also referenced by technical sections of the standards covering drinking fountains, faucet and flush controls, ATM and fare machines, appliances, storage, windows, and door and gate hardware...
-
2010 ADA Standards
104.1.1 Construction and Manufacturing Tolerances. ...
-
C102 Referenced Standards (Section-by-Section Analysis)
As applied telecommunications equipment, this would require manufacturers to conform to WCAG 2.0 when providing electronic content integral to the use of their equipment (under proposed...
-
Specialized Customer Premises Equipment (Section-by-Section Analysis)
Ultratec, a manufacturer of TTYs, commented that the majority of the output criteria, and all of the compatibility criteria, are not applicable to TTYs....
-
Readily achievable (Advisory Guidance)
The guidelines do not require accessibility or compatibility when that determination has been made, and it is up to the manufacturer to make it....
-
11B-201.3 Temporary and permanent structures
Structures and equipment directly associated with the actual processes of construction are not required to be accessible as permitted in Section 11B-203.2. ◼...
-
11B-201.3 Temporary and permanent structures
Structures and equipment directly associated with the actual processes of construction are not required to be accessible as permitted in Section 11B-203.2. ◼...
-
Priority 1: Approach & Entrance
Word Fillable Form (1.5MB) Word Non-Fillable Form (1.3MB) PDF Non-Fillable Form (0.8MB)
-
Current Accessibility Guidelines That Apply to the Forest Service
The Forest Service and those working with or for the Forest Service on National Forest System land must comply with the following enforceable guidelines and standards when designing,...
-
234.4.2 Minimum Number
Where the structural or operational characteristics of an amusement ride are altered to the extent that the amusement ride's performance differs from that specified by the manufacturer or...
-
13) Detectable warnings
Must be a textured surface on the door handle or hardware (§4.29)....
-
§382.133(d)(1)
(1) A POC, a ventilator, a respirator or a continuous positive airway pressure machine that displays a manufacturer's label according to FAA requirements in circumstances where requirements...
-
Request for Clarification and Extension of Comment Period
In October 2011, the Department received a joint request from the Air Transport Association (now Airlines for America), the International Air Transport Association, the Air Carrier Association...
-
Handrail Requirements
Comments from the handrail industry, including manufacturers, trade associations, and others, indicated that these stipulations would effectively prohibit many common fabrication methods...
-
7. Lavatory
accessible guestroom bathroom no more than 34" high with at least 29" high clearance under the front edge to allow persons who use wheelchairs to pull under the lavatory and use the faucet hardware...
-
§ 38.107(a)(5)
Door latches and hardware shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist....
-
§ 38.123(a)(5)
Door latches and hardware shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist....
-
T603.4 Movement
Wheelchair securement systems shall limit the movement of an occupied wheelchair to 2 inches (51 mm) maximum in any direction when secured in accordance with the manufacturer’s instructions...
-
FAA:
Safety is the first and foremost mission of the FAA and includes the issuance and enforcement of regulations and standards related to the manufacture, operation, certification, and maintenance...
-
Just Manufacturing Stainless Steel Cup Strainer ADA Compliant Drain System
Body of stainless steel. Strainer of stainless steel. Stopper of rubber. 17 gauge chrome plated brass tailpiece. Die-cast zinc lock...
-
Just Manufacturing Classroom Concealed Ledgemount Teardrop Handles Restricted Swing Faucet
LEAD FREE COMPLIANT - CLASSROOM FAUCETS PVD chrome finish. Classroom faucets feature rigid spouts, or restricted swing spouts, providing preventative measures against wet counter...
-
Just Manufacturing Commercial Grade Single-Handle Pre-Rinse Kitchen Faucet
Polished Chrome Lead Free Compliant Single-Handle Pre-Rinse kitchen Faucet with Spring and Swivel Magnetic Spout. Deck mount Pre-Rinse Single Handle Cast...
