Past Testing Accommodations on Similar Standardized Exams or High-Stakes Tests. ...
Search Results "High-Contrast Captioning"
Filters
Commonly Searched Documents
-
What Kind Of Documentation Is Sufficient To Support A Request For Testing Accommodations?
-
904.4.2 Forward Approach
A portion of the counter surface that is 30 inches (760 mm) long minimum and 36 inches (915 mm) high maximum shall be provided....
-
904.4.2 Forward Approach
A portion of the counter surface that is 30 inches (760 mm) long minimum and 36 inches (915 mm) high maximum shall be provided....
-
2. Door Hardware
bathroom door hardware (levers, pulls, etc.) easily operable with one hand, without tight grasping, pinching or twisting of the wrist, since many persons with disabilities may not have high...
-
1008.2 Accessible Routes
Where accessible routes serve ground level play components, the vertical clearance shall be 80 inches high (2030 mm) minimum....
-
§ 38.95(c)(2) Ramp surface
The ramp or bridge plate surface shall be continuous and slip resistant, shall not have protrusions from the surface greater than 1/4 inch high, shall have a clear width of 30 inches and...
-
§ 38.125(c)(2) Ramp surface
The ramp or bridge plate surface shall be continuous and slip resistant, shall not have protrusions from the surface greater than 1/4 inch high, shall have a clear width of 30 inches and...
-
11B-809.7.2 Changes in level
complying with Section 11B-405, elevators complying with Section 11B-407 or platform lifts complying with Section 11B-410 shall be provided where changes in level exceed 1/2 inch (12.7 mm) high...
-
Savaria Orion LU/LA Elevator Video
The Orion elevator is designed with features you would expect in a high-rise elevator but built for commercial low-rise buildings....
-
Re: Section 307 Protruding Objects
Yes, it is a protruding object hazard based solely on section 307, but so is the (code compliant) lavatory with its (required) 29" high front edge, and the 8" deep (code compliant) shelf...
-
407.2.3.1 Floor Designation
Tactile characters shall be 2 inches (51 mm) high minimum. A tactile star shall be provided on both jambs at the main entry level....
-
Getting In
Building entries must be flush with the grade of the outside access route and have a beveled doorsill that is not more than one-half inch high....
-
K. Operable Parts
wands and controls on fixed lamps and HVAC units easily operable with one hand, without tight grasping, pinching or twisting of the wrist, since many persons with disabilities may not have high...
-
E2-3. Interior Stairs
., protected with a cane-detectable warning or a barrier that prevents travel into the area with less than an 80-inch-high head clearance)? [ADA Stds 4.4.2] Yes _____ No _____...
-
Can surface decals substitute for post- or wall-mounted signs?
No, the Standards require signs identifying accessible parking spaces that are at least 60” high measured to the bottom edge of the sign so that they are visible when a vehicle is parked...
-
Cybex Total Access Arc Trainer
Large Color Contrasted Foot Pedals ensure easy identification when mounting and dismounting. Easy Start Up of 15 Watts provides appropriate resistance for any user....
-
G. What are Detectable Warnings, Why are They Required, and Where Must They be Provided?
Detectable warnings consist of a series of small domes that contrast in color with the surrounding sidewalk or street....
-
B.3.iii. - What is the difference between "equivalent facilitation" and "alternative means of access"?
By contrast, an alternative means of access focuses on the accessibility of the information and data, rather than the technology....
-
11B-1008.2 Accessible routes
Where accessible routes serve ground level play components, the vertical clearance shall be 80 inches (2032 mm) high minimum....
-
T402.7 Edge Guards
Edge guards shall be 2 inches (51 mm) high minimum above the ramp or bridgeplate surface....
-
2.2 Who to Talk to About Getting Changes Made
If you are asking for bigger changes, it is best to talk to the people who make high-level decisions, such as the manager or owner. Ask the staff the best way to contact that person. ...
-
4.10.5 RAISED CHARACTERS ON HOISTWAY ENTRANCES
Such characters shall be 2 in (50 mm) high and shall comply with 4.30. Permanently applied plates are acceptable if they are permanently fixed to the jambs. (See Fig. 20)....
-
4.30.4* RAISED CHARACTERS OR SYMBOLS
Raised characters or symbols shall be at least 5/8 in (16 mm) high, but no higher than 2 in (50 mm). Symbols or pictographs on signs shall be raised 1/32 in (0.8 mm) minimum....
-
11B-1008.2 Accessible routes
Where accessible routes serve ground level play components, the vertical clearance shall be 80 inches (2032 mm) high minimum....
