The proposed rule did not provide any specific requirements regarding gripping surfaces on transfer supports. However, in the MDE NPRM preamble the Access Board repeatedly noted that...
Search Results "Elevator Car Position Indicator"
Filters
Commonly Searched Documents
-
M305.2.6 Gripping Surfaces (Section-by-Section Analysis)
-
5.4.9 Interruptions along Transfer Support Gripping Recommendation for M301 and M302
5.4.9 Interruptions along Transfer Support Gripping Recommendation for M301 and M302 Description: Transfer supports may contain elements to provide structural support or prevent...
-
5.3 Transfer Sides
5.3 Transfer Sides.
-
5.3 Transfer Sides Recommendations
5.3 Transfer Sides Recommendations
-
Exception 9
The elevator exception set forth in this section does not obviate or limit in any way the obligation to comply with the other accessibility requirements in this code....
-
1. Standing Supports
One commenter, a medical association, indicated that standing supports for imaging equipment vary widely based on the type of environment and specific imaging equipment being used....
-
1009.4 Elevators
In order to be considered part of an accessible means of egress, an elevator shall comply with Sections 1009.4.1 and 1009.4.2....
-
General [4.10.1]
Elevators must comply with the American Society of Mechanical Engineers (ASME) Safety Code for Elevators and Escalators (ASME A17.1‒1990)....
-
4.10.4(3)
In-car lanterns located in cars, visible from the vicinity of hall call buttons, and conforming to the above requirements, shall be acceptable....
-
Subpart F—Intercity Rail Cars and Systems
[See subsections ...]
-
§ 38.111(e)
(e) Existing cars retrofitted to meet the seating requirements of §37.91 of this title shall comply with §38.113(e), §38.123, §38.125(d) of this part and shall have at least one door on...
-
409.4.2 Floor Surfaces
Floor surfaces in elevator cars shall comply with 302 and 303....
-
409.4.2 Floor Surfaces
Floor surfaces in elevator cars shall comply with 302 and 303....
-
11B-411.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Section 11B-407.4.2....
-
11B-411.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Section 11B-407.4.2....
-
11B-411.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Section 11B-407.4.2....
-
1006.3.1 Clear Width
The clear width of golf car passages shall be 48 inches (1220 mm) minimum....
-
1006.3.1 Clear Width
The clear width of golf car passages shall be 48 inches (1220 mm) minimum....
-
11B-1006.3.1 Clear width
The clear width of golf car passages shall be 48 inches (1219 mm) minimum....
-
11B-1006.3.1 Clear width
The clear width of golf car passages shall be 48 inches (1219 mm) minimum....
-
11B-1006.3.1 Clear width
The clear width of golf car passages shall be 48 inches (1219 mm) minimum....
-
11B-216.7 Elevators
Where existing elevators do not comply with Section 11B-407, elevators complying with Section 11B-407 shall be clearly identified with the International Symbol of Accessibility complying...
-
11B-216.7 Elevators
Where existing elevators do not comply with Section 11B-407, elevators complying with Section 11B-407 shall be clearly identified with the International Symbol of Accessibility complying...
-
11B-216.7 Elevators
Where existing elevators do not comply with Section 11B-407, elevators complying with Section 11B-407 shall be clearly identified with the International Symbol of Accessibility complying...