Additionally, the Committee recommended a horizontal distance from the transfer surface of no more than 3 inches from the edge of the patient support surface, indicating that stretcher transfer...
Search Results "Elevator Car Position Indicator"
-
M305.2.1 Location (Section-by-Section Analysis)
-
11B-408.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303....
-
11B-408.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303....
-
M305.2.3 Height (Section-by-Section Analysis)
Additionally, for transfer surfaces that are greater than 24 inches deep, the MDE Advisory Committee recommended requiring a positioning support instead of a transfer support, with a height...
-
citEcar Wheelchair 6PR SL Street Legal Golf Cart
All citEcar Electric Vehicles are built in our Gainesville, Florida facility. This six seater + 1 wheelchair street legal golf cart can travel up to forty miles per charge. Included...
-
(2) Transfer Surface Location for Diagnostic Equipment Used in the Seated Position
Commenters also raised concerns with the provisions in the MDE NPRM related to transferring to medical diagnostic equipment used by patients in the seated position....
-
M301.3.2 Stirrups
Where stirrups are provided, they shall provide a method of supporting, positioning, and securing the patient’s legs....
-
Shower Spray Unit
The guidelines require tubs to have shower spray units that can be used as both a fixed position shower head and a hand-held shower (607.6)....
-
Gripping Surface Cross Section and Clearances M301, M302, and M305.2
Gripping Surface Cross Section and Clearances M301, M302, and M305.2 Gripping surface for transfer supports shall be free of sharp or abrasive elements and shall have rounded...
-
M305.2.2.1 End Transfer Supports
Transfer supports shall be positioned along 13 ½ inches (345 mm) minimum of the depth of the transfer surface....
-
240.2.2 Elevated Play Components
240.2.2 Elevated Play Components. Where elevated play components are provided, at least 50 percent shall be on an accessible route and shall comply with 1008.4....
-
M302.1 General
Where diagnostic equipment is used by patients in a seated position, it shall comply with M302....
-
M301.2.1 Adjustability (Section-by-Section Analysis)
The MDE NPRM proposed a transfer surface height range for diagnostic equipment used by patients in the supine, prone, or side-lying position of 17 inches minimum and 19 inches maximum....
-
§ 37.89 Remanufacture of intercity and commuter rail cars and purchase or lease of remanufactured intercity and commuter rail cars
[See subsections ...]
-
11B-408 Limited-use/limited-application elevators
[See subsections ...]
-
11B-408 Limited-use/limited-application elevators
[See subsections ...]
-
§ 38.125(b)(7) Platform gaps
When the lift is at car floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and car floor shall not exceed 1/2 inch horizontally...
-
§ 38.125(b)(5) Platform barriers
A movable barrier or inherent design feature shall prevent a wheelchair or mobility aid from rolling off the edge closest to the car until the lift is in its fully raised position....
-
F240.2.2 Elevated Play Components
Where elevated play components are provided, at least 50 percent shall be on an accessible route and shall comply with 1008.4. Advisory F240.2.2 Elevated Play Components....
-
240.2.2 Elevated Play Components
Where elevated play components are provided, at least 50 percent shall be on an accessible route and shall comply with 1008.4. Advisory 240.2.2 Elevated Play Components....
-
§ 38.95(b)(10) Platform movement
(10) Platform movement. No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during...
-
§ 37.93 One car per train rule
[See subsections ...]
-
Symmetry Elevating Solutions Limited Use/Limited Application (LU/LA) Elevator
Requires the Premium User plan or above. (Login or upgrade your account!) -
5.4.3 Transfer Support Height for M301 and M302
The purpose of a minimum height is to ensure that the gripping surface is at an adequate height to facilitate positioning during a transfer....
