5.3.2.2 Transfer Sides for Imaging Equipment. The transfer surface should be provided on at least one long side of the table.
Search Results "Elevator Car Position Indicator"
Filters
Commonly Searched Documents
-
5.3.2.2 Transfer Sides for Imaging Equipment
-
e-ii
Does the floor area of the elevator car have space to enter, reach the controls, and exit?...
-
11B-407.2.1.5 Signals
Call buttons shall have visible signals to indicate when each call is registered and when each call is answered. Exceptions: 1. Reserved. 2. Reserved....
-
11B-407.2.1.5 Signals
Call buttons shall have visible signals to indicate when each call is registered and when each call is answered. Exceptions: 1. Reserved. 2. Reserved. [2010 ADAS] 2....
-
11B-407.2.1.5 Signals
Call buttons shall have visible signals to indicate when each call is registered and when each call is answered. Exceptions: Reserved. Reserved. [2010 ADA Standards] 2....
-
407.2.2.4 Differentiation
Each destination-oriented elevator in a bank of elevators shall have audible and visible means for differentiation....
-
407.2.2.4 Differentiation
Each destination-oriented elevator in a bank of elevators shall have audible and visible means for differentiation....
-
407.2.1.4 Location
A destination-oriented elevator system provides lobby controls enabling passengers to select floor stops, lobby indicators designating which elevator to use, and a car indicator designating...
-
407.2.1.4 Location
A destination-oriented elevator system provides lobby controls enabling passengers to select floor stops, lobby indicators designating which elevator to use, and a car indicator designating...
-
407.2.1.4 Location
A destination-oriented elevator system provides lobby controls enabling passengers to select floor stops, lobby indicators designating which elevator to use, and a car indicator designating...
-
407.2.2.4 Differentiation
Each destination-oriented elevator in a bank of elevators shall have audible and visible means for differentiation....
-
11B-408.2.2 Hall signals
Hall signals shall comply with Section 11B-407.2.2.
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
408.3.2.1 Power Operation
Swinging doors shall be power-operated and shall comply with ANSI/BHMA A156.19 (1997 or 2002 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1).
-
M302.2.1 Adjustability
A low transfer position at a height of 17 inches (430 mm) minimum and 19 inches (485 mm) maximum; B. A high transfer position at 25 inches (635 mm); and C....
-
F238.2.2 Putting Greens
Putting greens shall be designed and constructed so that a golf car can enter and exit the putting green....
-
11B-238.2.2 Putting greens
Putting greens shall be designed and constructed so that a golf car can enter and exit the putting green. ...
-
238.2.2 Putting Greens
Putting greens shall be designed and constructed so that a golf car can enter and exit the putting green....
-
11B-238.2.2 Putting greens
Putting greens shall be designed and constructed so that a golf car can enter and exit the putting green. ...
-
11B-238.2.2 Putting greens
Putting greens shall be designed and constructed so that a golf car can enter and exit the putting green....
-
12162(a)(2)(A) General rule
use wheelchairs, it shall be considered discrimination for purposes of section 12132 of this title and section 794 of title 29 for a person to purchase or lease any new rail passenger cars...
-
Accessible Routes: ADA Standard Section 1006.2
The 48 inch (1220 mm) minimum width for the accessible route is necessary to ensure passage of a golf car on either the accessible route or the golf car passage....
-
11B-1006.2 Accessible routes
The 48 inch (1220 mm) minimum width for the accessible route is necessary to ensure passage of a golf car on either the accessible route or the golf car passage....
-
B. Summary of Major Provisions and Organization of Technical Criteria
The Access Board has divided the MDE Standards into separate technical criteria based on how the diagnostic equipment is used by the patient: (1) supine, prone, or side lying position (M301...