The subcommittee also discussed adding an allowance for a sloped region at the base of the gantry....
Search Results "Slope Meter"
Filters
Commonly Searched Documents
-
Base Support [No specific provision—affects M303.2.4]
-
Trailheads
Department of the Interior, National Park Service for installing an inaccessible toilet at 10,000 feet (3,048 meters) on Mt. Rainer....
-
Individuals with Partial or Total Vision Loss
In addition, their path of travel may be influenced by subtle changes in grade or cross slope that are not readily detected by others, or by overhead and overhanging branches, etc., and...
-
11B-303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 11B-303.3 Beveled....
-
Trash, Recycling, and Other Essential Containers
The slope of the clear space must not be steeper than 1:48 (2 percent) in any direction....
-
BlindSquare App
It supports additional accessories to enhance the user experience.You can use BlindSquare for example to find the most popular cafe within a 200 meter radius or to find the nearest post...
-
Sloan WETS 2050.1201-1.28 Solar-Powered HET Flushometer and HET Wall Hung Water Closet
and Flange for 1-1/2" Top Spud Sweat Solder Adapter with Cover Tube and Cast Wall Flange with Set Screw High copper, low zinc brass castings for dezincification resistance Fixed Metering...
-
Camping Units
Do not allow the slope of the ground surface in camp living areas to exceed 1:48 (2 percent) in any direction, except when the surface is unpaved or is not built with boards....
-
Parking
Parking areas may lack accessible parking spaces with adequate access aisles and signs, or may be on a sloped surface....
-
Section E: Route from Entrance
(§303.3)     E6 Is the running slope of part of the route greater than 1:20?...
-
Issue 14: Inspection of contractor’s work - Beware of field changes!
Note shifting slopes and cross slopes on the ramps in addition to poor APS location. Â ...
-
1. Access Barrier Removal in Existing Pedestrian Facilities
uneven pavement in the pedestrian rights of way; (5) repair of vertical or horizontal displacement or upheaval of the sidewalk or crosswalk surfaces; (6) correction of non-compliant cross-slopes...
-
11B-307.3 Post-mounted objects
Exception: Â The sloping portions of handrails serving stairs and ramps shall not be required to comply with Section 11B-307.3....
-
406.7 Islands
Each 48 inch (1220 mm) minimum by 36 inch (915 mm) minimum area shall be oriented so that the 48 inch (1220 mm) minimum length is in the direction of the running slope of the curb ramp it...
-
202.6.1
Such measures include but are not limited to providing a ramp with a steeper slope or widening a doorway to a narrower width than that mandated by the alterations requirements....
-
307.3 Post-Mounted Objects
EXCEPTION: The sloping portions of handrails serving stairs and ramps shall not be required to comply with 307.3....
-
Platform Size and Surface
In addition, changes in level between ¼ to ½ inch must be beveled with a slope 1:2 maximum; changes in level more than ½ inch must be treated as a ramp....
-
Constructed Features in Recreation Sites
If constructed features are replaced, but the ground under the feature isn't changed, the surface and slope of the ground under the feature doesn't have to be brought into conformance with...
-
Curb Ramps
If a curb ramp is located where pedestrians must walk across the ramp, or where it is not protected by handrails or guardrails, it shall have flared sides; the maximum slope of the flare...
-
11B-307.3 Post-mounted objects
Exception:  The sloping portions of handrails serving stairs and ramps shall not be required to comply with Section 11B-307.3.  ...
-
11B-307.3 Post-mounted objects
Exception: The sloping portions of handrails serving stairs and ramps shall not be required to comply with Section 11B-307.3....
-
Diversified Woodcrafts Forward Vision ADA Workstation 2956KF-L-ADA
The sloping front allows a person in a wheelchair to roll right up to the sink area....
-
Salsbury Industries See Through Metal Locker Single Tier 1 Wide
combination or key locks and combination or key padlocks Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936 Options Sloping...
-
Salsbury Industries See Through Metal Locker Single Tier 3 Wide
combination or key locks and combination or key padlocks Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936 Options Sloping...
