At dining and work surfaces required to be accessible by Section 11B-226.1, knee clearance shall extend 19 inches (483 mm) deep minimum at 27 inches (686 mm) above the finish floor or ground...
Search Results "Parking Surface"
-
11B-306.3.3 Minimum required depth
-
M303.2.5 Surfaces (Section-by-Section Analysis)
The MDE NPRM proposed to require diagnostic equipment used by patients seated in a wheelchair to provide a wheelchair space with a surface that does not slope more than 1:48 in any direction...
-
4.2.2 Cooking Surface Height
The cooking surface shall be at least 15 inches (380 mm) and no more than 34 inches (865 mm) above the floor or ground surface. ...
-
809.2.1.2 Floor Surfaces
809.2.1.2 Floor Surfaces This section specifies that carpet not be provided on floor surfaces in emergency transportable housing units with mobility features....
-
RECOMMENDATIONS
RECOMMENDATIONS An objective test procedure for measuring the firmness and stability of surfaces with a portable device and performance specifications need to be accepted in order to...
-
Exposed Pipes and Surfaces [4.19.4]
Exposed Pipes and Surfaces [4.19.4] To prevent burns, hot water pipes and drain pipes under lavatories must be insulated or otherwise configured to protect against contact....
-
606.5 Exposed Pipes and Surfaces
606.5 Exposed Pipes and Surfaces. Water supply and drain pipes under lavatories and sinks shall be insulated or otherwise configured to protect against contact....
-
How to Measure Access Aisles
In the final rule, the Board has clarified how parking spaces and access aisles are to be measured....
-
804.3 Kitchen Work Surface
804.3 Kitchen Work Surface....
-
Sargent NB8700 Top Latch Surface Vertical Rod Exit Device
Surface Vertical Rod Less Bottom Rod Exit Device is for both rated and non-rated openings....
-
408.4.2 Floor Surfaces
408.4.2 Floor Surfaces. Floor surfaces in elevator cars shall comply with 302 and 303....
-
Must van accessible spaces be restricted to van use?
Additional content on van designation signs can recommend that car drivers not use the space unless no other accessible parking space is available....
-
Brady Worldwide Fine Sign 112500
Part Number: 112500 Size: 6" H x 12" W Material Description: Reflective Aluminum
-
Pilot Rock CSL-6 and CSL-8 Car Stop
Series Overview Car Stops are made from 100% recycled plastic. They are maintenance free – withstand traffic, weather and salt. With the solid color throughout, they won’t chip...
-
7. Commit to Ongoing Maintenance of Accessible Playground Surfaces as a Responsibility of Ownership
or the Illinois Park District Risk Management Association (PDRMA)....
-
3. Review the Research Findings About Accessibility Issues for Play Surfaces
INSTALLATION Can be installed by contractor or park/facility personnel....
-
Problem Two
Problem Two: Accessible parking is provided, but it does not have a marked access aisle next to each designated accessible parking space....
-
Problem Four
Problem Four: No sign with the international symbol of accessibility is installed at each accessible parking space....
-
B4
For van-accessible spaces (particularly in a garage or parking structure), is there vertical clearance of at least 98 inches (8 feet - 2 inches) for the vehicle route to the parking space...
-
11B-502.8 Additional signage
An additional sign shall be posted either; 1) in a conspicuous place at each entrance to an off-street parking facility or 2) immediately adjacent to on-site accessible parking and visible...
-
11B-502.8 Additional signs
An additional sign shall be posted either; 1) in a conspicuous place at each entrance to an off-street parking facility or 2) immediately adjacent to on-site accessible parking and visible...
-
11B-502.8 Additional signs
An additional sign shall be posted either; 1) in a conspicuous place at each entrance to an off-street parking facility or 2) immediately adjacent to on-site accessible parking and visible...
-
Problem Two
Problem Two: Accessible parking is provided, but it does not have a marked access aisle next to each accessible space....
-
6. Minimum (Low) Height Standard for Transfer Surfaces
Minimum (Low) Height Standard for Transfer Surfaces As indicated in Section 5.1.1, the MDE Advisory Committee recommends that equipment with transfer surfaces be height adjustable in...
