The required clearance around the water closet shall be permitted to overlap the water closet, associated grab bars, dispensers, sanitary napkin disposal units, coat hooks, shelves, accessible...
Search Results "Parallel Grab Bar"
Commonly Searched Documents
-
604.3.2 Overlap
-
Dimensions: ADA Standard Section 810.2.2
areas shall provide a clear length of 96 inches (2440 mm) minimum, measured perpendicular to the curb or vehicle roadway edge, and a clear width of 60 inches (1525 mm) minimum, measured parallel...
-
Equivalent Facilitation [§103]
For example, transfer shower stalls are required to be 36 inches by 36 inches absolute so that grab bars remain within reach from the seat....
-
11B-807.2.3 Beds
The clear floor space shall be positioned for parallel approach to the side of the bed....
- Blue Ridge Independent Living Center (BRILC) - Roanoke and Christianburg, VA
-
Slope: ADA Standard Section 810.2.4
Parallel to the roadway, the slope of the bus stop boarding and alighting area shall be the same as the roadway, to the maximum extent practicable....
-
11B-809.10.6.3 Floor space
maneuvering space 30 inches (762 mm) wide minimum by 48 inches (1219 mm) minimum in length shall be located outside the shower, with the width flush with the control wall and the length parallel...
-
11B-810.2.4 Slope
Parallel to the roadway, the slope of the bus stop boarding and alighting area shall be the same as the roadway, to the maximum extent practicable....
-
11B-604.9 Water closets and toilet compartments for children's use
mm) Toilet Seat Height 11 to 12 inches (279 to 305 mm) 12 to 15 inches (305 to 381 mm) 15 to 17 inches (381 to 432 mm) Grab...
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm), with bars...
-
11B-810.2.2 Dimensions
areas shall provide a clear length of 96 inches (2438 mm) minimum, measured perpendicular to the curb or vehicle roadway edge, and a clear width of 60 inches (1524 mm) minimum, measured parallel...
-
11B-503.3 Access aisle
Passenger drop-off and loading zones shall provide access aisles complying with Section 11B-503 adjacent and parallel to the vehicle pull-up space....
-
Baby Changing Tables
Certain elements are permitted to overlap space at water closets, such as grab bars, paper dispensers, and coat hooks (604.3.2)....
-
604.3.2 Overlap
The required clearance around the water closet shall be permitted to overlap the water closet, associated grab bars, dispensers, sanitary napkin disposal units, coat hooks, shelves, accessible...
-
11B-604 Water closets and toilet compartments
The required clearance around the water closet shall be permitted to overlap the water closet, associated grab bars, dispensers, sanitary napkin disposal units, coat hooks, shelves, accessible...
-
WORKSTATION
Examples include ticket booths; the employee side of grocery store check stands; the bartender area behind a bar; the employee side of snack bars, sales counters and public counters; guardhouses...
-
2.6 Be Willing to File a Complaint
In addition, though the stalls in the restrooms were large enough, they were difficult to use without a raised toilet and grab bars. ...
-
Slope: ADA Standard Section 810.5.1
EXCEPTION: Where platforms serve vehicles operating on existing track or track laid in existing roadway, the slope of the platform parallel to the track shall be permitted to be equal to...
-
11B-810.5.1 Slope
Exception: Where platforms serve vehicles operating on existing track or track laid in existing roadway, the slope of the platform parallel to the track shall be permitted to be equal to...
- Stanley Hardware 8179 Light Commercial Door Closer
-
Privately Occupied Suite
The suite has a restroom and the way I see it, the clearance around the toilet, grab bars and plumbing fixtures are not code compliant. Three persons occupy the suite....
-
Future Work
Bars and the side guard were used often for repositioning the trunk and buttocks onto the platform after landing however their use for this purpose was not documented....
-
Construction and Manufacturing Tolerances: ADA Standard Section 104.1.1
Section 104.1.1 of the ADA Standards covers the most current information on dimensions in regards to construction and manufacturing tolerances in the ADA Standards.
-
1115B.4.5, Item 2
FIGURE 11B-8 -- CLEAR FLOOR SPACE AT BATHTUBS FIGURE 11B-9 -- GRAB BARS AT BATHTUBS ETA Editor's Note The requirements of 2010 CBC 1115B.4.5, Item 2 are identical to 1991...