EXCEPTION: Where the surface is other than concrete, asphalt, or boards, cross slopes not steeper than 1:20 shall be permitted when necessary for drainage....
Search Results "Gripping Surface"
Commonly Searched Documents
- 
    
  
  1016.7.2 Cross Slope
  
 - 
    
  
  7.4.8 Protruding Objects
  
Constructed features, including signs, shall not extend into the trail tread more than 4 inches (100 mm) between 27 inches (685 mm) and 80 inches (2030 mm) above the surface of the trail...
 - 
    
  
  2.4.2 Cross Slope
  
Where the surface is paved or is elevated above the natural ground, the cross slope shall not be steeper than 1:48 (2 percent). ...
 - 
    
  
  1016.7.2 Cross Slope
  
EXCEPTION: Where the surface is other than concrete, asphalt, or boards, cross slopes not steeper than 1:20 shall be permitted when necessary for drainage....
 - 
    
  
  1018.8.2 Slope
  
Where the surface is other than asphalt, concrete, or boards, slopes not steeper than 1:20 are permitted when necessary for drainage....
 - 
    
  
  M302.2.2 Size
  
The transfer surface shall be 21 inches (610 mm) wide minimum and 15 inches (381 mm) deep minimum. Advisory M302.2.2 Size....
 - 
    
  
  1011.2.3 Slope
  
Where the surface is other than asphalt, concrete, or boards, slopes not steeper than 1:20 are permitted when necessary for drainage....
 - 
    
  
  1016.7.2 Cross Slope
  
Where the surface is other than asphalt, concrete, or boards, cross slopes not steeper than 1:20 are permitted when necessary for drainage....
 - 
    
  
  1018.8.2 Slope
  
EXCEPTION: Where the surface is other than concrete, asphalt, or boards, cross slopes not steeper than 1:20 shall be permitted when necessary for drainage....
 - 
    
  
  1018.8.2 Slope
  
EXCEPTION: Where the surface is other than concrete, asphalt, or boards, cross slopes not steeper than 1:20 shall be permitted when necessary for drainage....
 - 
    
  
  4.3.3 Slope
  
When the surface is not paved or is not elevated above the natural ground, slopes not steeper than 1:33 (3 percent) shall be permitted where necessary for drainage. ...
 - 
    
  
  2004 ADA and ABA Accessibility Guidelines
  
The following technical criteria in the proposed standards are based on the 2004 ADA and ABA Accessibility Guidelines: • Height of transfer surfaces on diagnostic equipment used by patients...
 - 
    
  
  5.1.3 Transfer Surface Low Height Options for M301 and M302
  
5.1.3 Transfer Surface Low Height Options for M301 and M302 The Committee did not agree on a final low height recommendation....
 - Sears Brands, LLC Craftsman 24 in. Digital LaserTrac® Level
 - M-D Building Products, Inc. GEN2 SmartTool™ Digital Level
 - 
    
  
  1018.10 Dune Crossings
  
The curbs or barriers shall prevent the passage of a 2 inch (50 mm) diameter sphere, where any portion of the sphere is within 2 inches (50 mm) of the crossing surface....
 - 
    
  
  1018.10 Dune Crossings
  
The curbs or barriers shall prevent the passage of a 2 inch (50 mm) diameter sphere, where any portion of the sphere is within 2 inches (50 mm) of the crossing surface....
 - 
    
  
  M301.2 Transfer Surface
  
A transfer surface shall be provided and shall comply with M301.2....
 - 
    
  
  M301.2 Transfer Surface
  
A transfer surface shall be provided and shall comply with M301.2....
 - 
    
  
  Standing Supports (M304.3 and M305.3)
  
Standing Supports (M304.3 and M305.3) M304.3 Proposed Provision: Would require standing supports to be provided on each side of the standing surface on diagnostic equipment used by patients...
 - AccessRec GrassProtecta Slip Resistant Grass Reinforcement Mesh
 - 
    
  
  Medical Diagnostic Equipment Accessibility Standards Sub Committee Recommendations Stretcher Final Report
  
Equipment Features Addressed in Technical Criteria Types Of Equipment To Which Technical Criteria Applies Supine, prone, or side-lying position (M301) Transfer surface...
 - Smith System Husky Clover Activity Table
 - 
    
  
  T302.3 Openings
  
Openings in walking surfaces shall not allow the passage of a sphere more than 5/8 inch (16 mm) in diameter....