The curbs or barriers shall prevent the passage of a 2 inch (50 mm) diameter sphere, where any portion of the sphere is within 2 inches (50 mm) of the crossing surface....
Search Results "Gripping Surface"
Commonly Searched Documents
- 
    
  
  1018.10 Dune Crossings
  
 - 
    
  
  1018.10 Dune Crossings
  
The curbs or barriers shall prevent the passage of a 2 inch (50 mm) diameter sphere, where any portion of the sphere is within 2 inches (50 mm) of the crossing surface....
 - 
    
  
  M301.2 Transfer Surface
  
A transfer surface shall be provided and shall comply with M301.2....
 - 
    
  
  M301.2 Transfer Surface
  
A transfer surface shall be provided and shall comply with M301.2....
 - 
    
  
  Standing Supports (M304.3 and M305.3)
  
Standing Supports (M304.3 and M305.3) M304.3 Proposed Provision: Would require standing supports to be provided on each side of the standing surface on diagnostic equipment used by patients...
 - 
    
  
  Medical Diagnostic Equipment Accessibility Standards Sub Committee Recommendations Stretcher Final Report
  
Equipment Features Addressed in Technical Criteria Types Of Equipment To Which Technical Criteria Applies Supine, prone, or side-lying position (M301) Transfer surface...
 - 
    
  
  T302.3 Openings
  
Openings in walking surfaces shall not allow the passage of a sphere more than 5/8 inch (16 mm) in diameter....
 - 
    
  
  1008.2.6.1 Accessibility
  
Ground surfaces shall comply with ASTM F 1951 (incorporated by reference, see "Referenced Standards" in Chapter 1)....
 - 
    
  
  10.3.1(19)
  
Gates which must be pushed open by wheelchair or mobility aid users shall have a smooth continuous surface extending from 2 inches above the floor to 27 inches above the floor....
 - 
    
  
  Kitchen Cabinets
  
“C” grips on cabinets and drawers throughout the house FSC certified book matched Santos rosewood Full drawer extensions for easy access Heavy items stored low...
 - 
    
  
  1014.2.1.1.2 Slope
  
The slope of the surface of the clear ground space shall not be steeper than 1:48 in any direction....
 - 
    
  
  1014.2.1.1.2 Slope
  
The slope of the surface of the clear ground space shall not be steeper than 1:48 in any direction....
 - 
    
  
  1013.3 Slope
  
The slope of the surface of tent pads, tent platforms, and clear ground spaces shall not be steeper than 1:48 in any direction....
 - 
    
  
  1013.3 Slope
  
The slope of the surface of tent pads, tent platforms, and clear ground spaces shall not be steeper than 1:48 in any direction....
 - 
    
  
  1133A.4, Item 3
  
Sinks and work surfaces may be a single integral unit a minimum of 60 inches (1524 mm) in length, or be separate components....
 - 
    
  
  1133A.4, Item 3
  
Sinks and work surfaces may be a single integral unit a minimum of 60 inches (1524 mm) in length, or be separate components....
 - 
    
  
  M304.2.2 Standing Supports
  
Standing supports shall be provided on two sides of the standing surface and shall comply with M305.3....
 - GE Artistry™ Series 30" Free-Standing Electric Range ABS45DFWS
 - 
    
  
  Allowances for Typical Roadway Geometry
  
for Typical Roadway Geometry The 1991 ADAAG and 2004 ADA and ABA Accessibility Guidelines specify a maximum running slope of 5 percent and maximum cross slope of 2 percent for walking surfaces...
 - Varidesk LLC. Pro Desk 60™ Height-Adjustable Standing Desk
 - 
    
  
  Transfer Surface Size: Equipment Used by Patients in Supine, Prone, or Side-Lying Position (M301.2.2)
  
As noted earlier, the technical criteria do not address the overall width and depth of patient support surfaces because of the diverse shape and size of these surfaces....
 - 
    
  
  5.2.1.4 Transfer Surface Size Recommendations for Imaging Equipment (M301)
  
5.2.1.4 Transfer Surface Size Recommendations for Imaging Equipment (M301) The Committee recommends a transfer surface size on imaging equipment be a minimum of 28 inches long by a minimum...
 - Diversified Woodcrafts Forward Vision ADA Workstation 2956KF-L-ADA