cherry or mahogany finish and include a black name / number plate Designer lockers include a black laminated base and are available in 5 feet and 6 feet high (add 4" for base) Each compartment...
Search Results "End of Row Compartment"
Filters
Commonly Searched Documents
-
Salsbury Industries Designer Wood Locker Double Tier 'S' Style 1 Wide
-
C. Why are Curb Ramps at Pedestrian Crossings Required?
It is often difficult or impossible for a person using a wheelchair, scooter, walker, or other mobility device to cross a street if the sidewalk on either side of the street ends without...
-
List of Subjects for 28 CFR Part 36
Buildings and facilities Business and industry Civil rights Individuals with disabilities Penalties Reporting and recordkeeping requirements End...
-
LULA Elevator Dimensions
The guidelines specify that LULA elevator cars be at least 42 inches wide and 54 inches deep with a door on the narrow end providing at least 32 inches clear width (408.4.1)....
-
610.2 Bathtub Seats
Permanent seats at the head end of the bathtub shall be 15 inches (380 mm) deep minimum and shall extend from the back wall to or beyond the outer edge of the bathtub....
-
304.3.2 T-Shaped Space
The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm....
-
R309.2 Parallel Parking Spaces
Accessible parallel parking spaces located at the end of the block face are usable by vans that have rear lifts and cars that have scooter platforms....
-
§8.27(a)
To this end, when an accessible unit becomes vacant, the owner or manager before offering such units to a non-handicapped applicant shall offer such unit:...
-
3. Measuring Door Openings
Place the end of the tape measure on the side of the door frame next to the clear opening (see below). Stretch the tape across the door opening to the face of the door....
-
Question 11
Should the replacement of inaccessible medical equipment or furniture be triggered only by the end of the useful life of the equipment or furniture?...
-
304.3.2 T-Shaped Space
The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm....
-
R212.6 Benches
The clear space shall be located either at one end of the bench or shall not overlap the area within 460 mm (1.5 ft) from the front edge of the bench....
-
304.3.2 T-Shaped Space
The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm....
-
28 CFR Part 36, Appendix B: Preamble to Regulation on Nondiscrimination on the Basis of Disability by Public Accommodations and in Commercial Facilities (1991 ADA Title III Regulations Preamble)
nondiscrimination on the basis of disability by public accommodations and in commercial facilities beginning at the heading "Section-by-Section Analysis and Response to Comments'' and ending...
-
11B-502.6.4.1
a maximum of 6 inches (152 mm) from the centerline of the parking space, its sides parallel to the length of the parking space and its lower corner at, or lower side aligned with, the end...
-
11B-610.2 Bathtub seats
Permanent seats at the head end of the bathtub shall be 15 inches (381 mm) deep minimum and shall extend from the back wall to or beyond the outer edge of the bathtub....
-
Boating facilities. (Section-by-Section Analysis)
If gangways (only one end of route is attached to land) and floating piers (neither end is attached to land) are involved, a number of exceptions are provided from the general standards...
-
Boating facilities. (Section-by-Section Analysis)
If gangways (only one end of route is attached to land) and floating piers (neither end is attached to land) are involved, a number of exceptions are provided from the general standards...
-
502.3 Accessibility Services (Section-by-Section Analysis)
A documented set of accessibility services is important to end-users because, without them, developers are likely to provide inconsistent access to assistive technology, thereby leaving...
-
ASME: ADA Standard Section 105.2.2
Section 105.2.2 of the ADA Standards cover references to the American Society of Mechanical Engineers (ASME) standards.
-
2.5 Visual Detection Distance
The row and column headings refer to the detectable warning colors tested....
-
11B-403.5.1 Clear width
The clear width for accessible routes to accessible toilet compartments shall be 44 inches (1118 mm) except for door-opening widths and door swings....
-
Hager Companies Round Push/Pull Bar Set 157D-V-B
Round Push/Pull Bar Set 157D-V-B D = Standard Fastening: - One (1) Type 7 spanner collar connection between push bar and pull plus two (2) Type 1 connections for other ends of...
-
Hager Companies Round Push/Pull Bar Set 164D-V-B
Round Push/Pull Bar Set 164D-V-B D = Standard Fastening: - One (1) Type 7 spanner collar connection between push bar and pull plus two (2) Type 1 connections for other ends of...
