Constructed elements on trails, passing spaces, and resting intervals shall comply with 307. Advisory 1017.9 Protruding Objects....
Search Results "Rest Stop"
-
1017.9 Protruding Objects
-
Slopes and Resting Intervals for Outdoor Recreation Access Routes
A resting interval must be at least 60 inches (1,525 millimeters) long and at least as wide as the widest segment of the outdoor recreation access route leading into it, if the resting interval...
-
Accessible Route to Parking
A typical design solution where accessible routes run in front of spaces is the provision of wheel stops that help prevent encroachment into the accessible route....
-
1016.8.1 Length
This section requires resting intervals to be 60 inches long minimum....
-
11B-209 PASSENGER LOADING ZONES AND BUS STOPS
[See subsections ...]
-
1016.8.1 Length
The resting interval length shall be 60 inches (1525 mm) long minimum....
-
2.5.2 Length
The resting interval length shall be 60 inches (1525 mm) long minimum....
-
1016.8.1 Length
The resting interval length shall be 60 inches (1525 mm) long minimum....
-
7.4.3.1 Running Slope (Grade)
Where the running slope (grade) of a segment of a trail is steeper than 1:20 (5 percent), the maximum length of the segment shall be in accordance with Table 7.4.3.1, and a resting interval...
-
6.10 Openings
Openings in the surface of beach access routes and their related resting intervals may be up to 1/2 inch (13 millimeters) wide....
-
T215.3. Public Address and Stop Request Systems
Large non-rail vehicles that operate in fixed route service with multiple designated stops shall provide public address and stop request systems in accordance with T215.3....
-
1017.6 Openings
Openings in the surface of trails, passing spaces, and resting intervals shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1017.6 Openings. ...
-
1018.6 Openings
Openings in the surface of beach access routes and resting intervals shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1018.6 Openings. ...
-
1018.6 Openings
Openings in the surface of beach access routes and resting intervals shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1018.6 Openings....
-
1017.6 Openings
Openings in the surface of trails, passing spaces, and resting intervals shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1017.6 Openings....
-
11B-812.5.3 Relationship to accessible routes
A curb, wheel stop, bollards, or other barrier shall be provided if required to prevent encroachment of vehicles over the required clear width of adjacent accessible routes....
-
11B-812.5.3 Relationship to accessible routes
A curb, wheel stop, bollards, or other barrier shall be provided if required to prevent encroachment of vehicles over the required clear width of adjacent accessible routes....
-
11B-209 Passenger drop-off and loading zones and bus stops.
[See subsections ...]
-
Vertical Clearance: ADA Standard Section 307.4
Section 307.4 covers the current ADA Standards for vertical clearance.
-
11B-307.4 Vertical clearance
Exception: Door closers and door stops shall be permitted to be 78 inches (1981 mm) minimum above the finish floor or ground. ...
-
11B-307.4 Vertical clearance
Exception: Door closers and door stops shall be permitted to be 78 inches (1981 mm) minimum above the finish floor or ground. ...
-
Openings [1018.6]
Openings in the surface of beach access routes and resting intervals must be small enough so that a sphere more than one-half inch in diameter cannot pass through....
-
11B-209 Passenger drop-off and loading zones and bus stops
SECTION TITLE NOTES 11B-209 Passenger drop-off and loading zones and bus stops Amends...
-
Protruding Objects [1018.9]
Objects that protrude into the clear width of beach access routes and resting intervals can pose hazards to people who are blind or have low vision....