Search Results "Positioning Support"

• State and Local Documents > Codes and Standards > 2025 California Standards
  11B-407.4.10.1 Location

  Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-407.4.10.3 Structural strength

  Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting device...

• State and Local Documents > Codes and Standards > 2025 California Standards
  11B-407.4.10.3 Structural strength

  Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting device...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4.1 Transfer Support Location for M301 and M302

  Provisions require transfer supports be provided for use with the transfer sides and be located within reach of the transfer surface and not obstruct transfer onto the surface when in position...

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-1008.3.1.4 Transfer supports

  At least one means of support for transferring shall be provided....

• State and Local Documents > Codes and Standards > 2025 California Standards
  11B-1008.3.1.4 Transfer supports

  At least one means of support for transferring shall be provided....

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4.10 Transfer Support Fittings Recommendations for M301 and M302

  5.4.10 Transfer Support Fittings Recommendations for M301 and M302 Description: To ensure safe and effective transfers, transfer supports must not rotate within their fittings during...

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-407.4.10.2 Surfaces

  Support rails shall be smooth and any surface adjacent to them shall be free of sharp or abrasive elements....

• State and Local Documents > Codes and Standards > 2025 California Standards
  11B-407.4.10.2 Surfaces

  Support rails shall be smooth and any surface adjacent to them shall be free of sharp or abrasive elements....

• Federal Documents > Preamble to Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
  M301.3.1 Transfer Supports (Section-by-Section Analysis)

  The MDE NPRM proposed to require transfer supports to be provided for use with transfer sides on diagnostic equipment used by patients in the supine, prone, or side-lying position, and that...

• Federal Documents > Technical Assistance > 36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment - Example Applications of Proposed Standards
  Figure M1: Overview of M301 Diagnostic Equipment for Use by a Patient in a Supine, Prone, or Side-Lying Position

  [See subsections ...]

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.2.1 End Transfer Supports

  Transfer supports for transfer surfaces complying with M301.2.3.1 and M305.2.2.1 shall be 15 inches (380 mm) long minimum....

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M301.3.2 Leg Supports

  Where stirrups are provided, leg supports shall also be provided and shall comply with M305.4....

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4.8 Transfer Support Gripping Surface Hazard for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position

  5.4.8 Transfer Support Gripping Surface Hazard for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position....

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.2.2 Side Transfer Supports

  Transfer supports for transfer surfaces complying with M301.2.3.2 shall be 28 inches (710 mm) long minimum and shall be positioned along the width of transfer surfaces....

• Federal Documents > Preamble to Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
  M305.3.1 Length (Section-by-Section Analysis)

  (Significant Changes – Standing Supports), the final rule requires that horizontal standing supports be positioned horizontally in relation to standing surfaces and retains the proposed...

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.3.1 Length

  The length of gripping surfaces for standing supports shall be based on the position of the standing supports in relation to the standing surfaces they serve....

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M301.3.1 Transfer Supports

  Transfer surfaces required by M301.2 shall provide transfer supports and shall comply with M305.2....

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment NPRM
  M301.3.1 Transfer Supports

  Transfer supports shall be provided for use with the transfer sides required by M301.2.3 and shall comply with M305.2....

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4.3 Transfer Support Height for M301 and M302

  5.4.3 Transfer Support Height for M301 and M302 Description: Transfer support height applies to the vertical distance that the gripping area of the support is above the transfer surface...

• Federal Documents > Standards > 2010 ADA Standards
  Shooting Facilities with Firing Positions: ADA Standard Section 243

  Section 243 covers scoping requirements in the current ADA Standards for shooting facilities and firing positions.

• Federal Documents > Standards > 2010 ADA Standards
  Shooting Facilities with Firing Positions: ADA Standard Section 1010

  [See subsections ...]

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4.7 Transfer Support Gripping Surface Clearance Recommendation for M301 and M302

  to grasp the transfer support....

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4.4 Transfer Support Distance from Transfer Surface Recommendations for M301 and M302

  surface and can be effectively used to position during a transfer....