Support rails shall be provided on at least one wall of the car. Advisory 11B-407.4.10 Support rail....
Search Results "Non-Rail Vehicle"
Filters
Commonly Searched Documents
-
11B-407.4.10 Support rail
-
Transportation Vehicles: ADA Standard Section 8.
This provides information on the revisions to the ADA Standards regarding transportation vehicles.
-
T208 Passenger Access Routes
[See subsections ...]
-
CHAPTER 6: WHEELCHAIR SPACES AND SECUREMENT SYSTEMS
[See subsections ...]
-
T605 Seat Belts and Shoulder Belts
[See subsections ...]
-
T204.2 Doorways with Lifts, Ramps or Bridgeplates
Doorways with lifts or ramps shall comply with T502.2.
-
F. Chapter 5: Doorways, Circulation Paths, and Fare Collection Devices
Chapter 5 in the 2016 Non-Rail Vehicle Guidelines contains the technical requirements for doorways, illumination at doorways and boarding and alighting areas, passenger access routes, and...
-
§ 38.83(b)(7) Platform gaps
When the lift is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and vehicle floor shall not exceed 1/2 inch...
-
§ 38.53(a)(2)
or mobility aid users can be accommodated, then such doorway shall have a minimum clear opening of 30 inches to permit wheelchair and mobility aid users to be evacuated to an adjoining vehicle...
-
T503 Passenger Access Routes
In the 2016 Non-Rail Vehicle Guidelines, passenger access routes (which were referred to as “accessible circulation paths” in the proposed rule) must provide clearances sufficient to permit...
-
§ 38.83(b)(4) Power or equipment failure
(4) Power or equipment failure. Lift platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or...
-
§ 38.83(b)(10) Platform movement
(10) Platform movement. No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during...
-
§ 38.83(b)(11) Boarding direction
(11) Boarding direction. The lift shall permit both inboard and outboard facing of wheelchairs and mobility aids.
-
§ 38.81(a)
(a) Any stepwell or doorway with a lift, ramp or bridge plate immediately adjacent to the driver shall have, when the door is open, at least 2 foot-candles of illumination measured...
-
11B-812.6 Vehicle spaces
All vehicle spaces shall be marked to define their width....
-
11B-609.2.2 Non-circular cross section
Grab bars with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (102 mm) minimum and 4.8 inches (122 mm)...
-
ELECTRIC VEHICLE (EV)
An automotive-type vehicle for on-road use, such as passenger automobiles, buses. trucks vans, neighborhood electric vehicles, electric motorcycles, and the like, primarily powered by an...
-
Atlantis Railing
Our ADA accessibility railings can be customized to incorporate any of our other railing infill options and they are available in highly polished or brushed finish stainless steel rails....
-
10.3.2(4)
(4) In light rail, rapid rail and commuter rail key stations, the platform or a portion thereof and the vehicle floor shall be coordinated so that the vertical difference, measured when...
-
T204.3 Doorways with Level Boarding and Alighting
Doorways with level boarding and alighting shall comply with T502.3.
-
T704 Announcement Systems
[See subsections ...]
-
§ 38.79 Floors, steps and thresholds
[See subsections ...]
-
ELECTRIC VEHICLE (EV) CHARGER
Off-board charging equipment used to charge an electric vehicle....
-
§ 38.113(d)(4) Exception
Retrofitted vehicles shall be coordinated with the platform in existing stations such that the horizontal gap shall be no greater than 4 inches and the height of the vehicle floor, under...
