At least 50 percent of shelf space in storage facilities shall comply with Section 11B-811.
Search Results "Built-in Cabinet"
Filters
Commonly Searched Documents
-
11B-804.5 Storage
-
11B-804.5 Storage
At least 50 percent of shelf space in storage facilities shall comply with Section 11B-811.
-
11B-226.2 Dispersion
Dining surfaces required to comply with Section 11B-902 shall be dispersed throughout the space or facility containing dining surfaces for each type of seating in a functional area....
-
Height of Tables or Counters [4.32.4]
Height of Tables or Counters [4.32.4] Counter and table surface heights (28 to 34 inches) should be specified in consideration of the intended use. A height at the lower end of...
-
4.32.4* Height of Tables or Counters
The tops of accessible tables and counters shall be from 28 in to 34 in (710 mm to 865 mm) above the finish floor or ground.
-
4.32.4* HEIGHT OF WORK SURFACES
The tops of tables and work surfaces shall be from 28 in to 34 in (710 mm to 865 mm) from the floor or ground.
-
Activar JL Industries 1900 Series Dual AED & Emergency Oxygen Recessed or Surface-Mounted Cabinet
A Specialty Cabinet Designed to Accommodate Most AED’s on the Market Plus an Emergency Oxygen Unit. Select from Steel, Stainless Steel or Aluminum. ...
-
9.2.2(4)
(4) If fixed or built-in storage facilities such as cabinets, shelves, closets, and drawers are provided in accessible spaces, at least one of each type provided shall contain storage space...
-
Other Features in Progress
Shades in the DR to reduce contrast glare Attached area rugs in the den and DR Moveable cabinets....
-
5.3 Access Aisles
All accessible fixed tables shall be accessible by means of an access aisle at least 36 in (915 mm) clear between parallel edges of tables or between a wall and the table edges.
-
Strike First Corporation The Centurion™ Portable Fire Extinguisher Cabinet
-
American Specialties Recessed Specimen Pass-Through Cabinet 8154
Provides a convenient passage from patient-area into laboratory. Fabricated of 22 gauge type 304 satin-finish stainless steel. Internal latch prevents simultaneous door opening....
-
Kitchens, Kitchenettes, or Wet Bars [9.2.2(7)]
Kitchens, Kitchenettes, or Wet Bars [9.2.2(7)] Clear floor space for either a forward or a side approach is permitted for cabinets, counters, sinks, and appliances....
-
11 [§ 4.7.6]
11 [§ 4.7.6] A built-up curb ramp typically consists of asphalt or concrete that is poured and shaped into a ramp that runs at a 90-degree angle away from an intact curb down to the roadway...
-
Strike First Corporation The Centurion™ Portable Fire Extinguisher Cabinet Model
-
Dining Surfaces and Work Surfaces for Children's Use: ADA Standard Section 902.4
Accessible dining surfaces and work surfaces for children’s use shall comply with 902.4. EXCEPTION: Dining surfaces and work surfaces that are used primarily by children 5 years...
-
11B-902.4 Dining surfaces and work surfaces for children’s use
Accessible dining surfaces and work surfaces for children’s use shall comply with Section 11B-902.4. Exception: Dining surfaces and work surfaces that are used primarily by...
-
11B-902.1 General
Dining surfaces and work surfaces shall comply with Sections 11B-902.2 and 11B-902.3. Exception: Dining surfaces and work surfaces for children’s use shall be permitted to comply...
-
Built-Up Curb Ramps
Built-up curb ramps are permitted, but they cannot project in parking spaces, access aisles, or vehicle traffic lanes....
-
Bobrick Recessed Heavy Duty Specimen Pass-Through Cabinet B-50517
Provides convenient passage for specimen from patient area to laboratory. Mounts in walls 11" thick with adjustable flange. Type 304 stainless steel, satin finish. ADA compliant...
-
Bobrick Recessed Heavy Duty Specimen Pass-Through Cabinet B-50516
Provides convenient passage for specimen from patient area to laboratory. Mounts in walls 7" thick with adjustable flange. Type 304 stainless steel, satin finish. ADA compliant...
-
American Specialties Recessed Specimen Pass-Through Cabinet Model 8154
Requires the Premium User plan or above. (Login or upgrade your account!) -
11B-809.9.5 Lower shelving
Lower shelving and/or drawer space shall be provided at a height of 48 inches (1219 mm) maximum above the finish floor.
-
General [5.1]/ Access Aisles [5.3]
General [5.1]/ Access Aisles [5.3] Access is required to 5% of fixed or built-in tables distributed throughout dining areas....
