Building Entrance: The pull side of the entrance door does not provide at least 18 inches clearance to the side of the latch (1991 ADA Stds 4.13.6, Fig. 25; 2010 ADA Stds 404.2.4)...
Search Results "Toe Clearance"
Filters
Commonly Searched Documents
-
Polling place violations that can be remediated with temporary measures
-
Door Swing: ADA Standard Section 603.2.3
Section 603.2.3 covers the current ADA Standards for door swings at clear floor space and clearances at fixtures in toilet and bathing rooms.
-
11B-809.2.2 Turning space
It is generally acceptable to use required clearances to provide wheelchair turning space....
-
Medical Diagnostic Equipment Accessibility Standards Sub-Committee Recommendations Weight Scales
Technical Criteria Types Of Equipment To Which Technical Criteria Applies Seated in a wheelchair (M303) Wheelchair space, including orientation, width, depth, knee and toe...
-
New Construction
Designers should use the Chapter 3 building blocks that address reach ranges, knee and toe clearance, clear floor space, protruding objects and operable parts when designing the space....
-
NYC Board of Elections: Video 3 - Accessibility Clerk Responsibilities
-
Figure 604.3.2 (Exception) Overlap of Water Closet Clearance in Residential Dwelling Units – Drawing from the U.S. Access Board
-
11B-603.2.3 Door swing
Doors shall not swing into the clear floor space or clearance required for any fixture....
-
Section 6.0 Conclusions
Knee and toe clearances: Current U.S. standards for knee and toe clearances do not accommodate a majority of participants in our sample. 10.Maneuvering clearances: A significant proportion...
-
Grab Bars: ADA Standard Section 1009.4.5
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
-
Attachment I: Program Access in Existing Facilities
Attachment I: Program Access in Existing Facilities
-
Pilot Rock RT Series End Accessible Recycled Plastic Picnic Table
This design meets or exceeds the current ADA guidelines for wheelchair accessibility and provides wheelchair access at one end (30" wide, 27" under table top and 19" knee plus 5" toe clearances...
-
AISLE
., that provides clearances in compliance with this code....
-
Transfer Entry: ADA Standard Section 1002.5.3
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
11B-1002.5.3 Transfer entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
11B-1009.4.5 Grab bars
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
-
SCIFIT Recumbent Bikes - ISO1000R & ISO7000R
Featuring a true step-through design with 23 inches of clearance, SCIFIT recumbent bikes provide easy access for all users....
-
Boost Your Business - Chapter 7 - Halls and Fountains
Boost Your Business - Chapter 7 - Halls and Fountains
-
Lavatories Adjacent to Partitions
Per 11B-606.2, we know that a clear space positioned for a forward approach is required (with exceptions), with proper knee and toe clearance. ...
-
902 Dining Surfaces and Work Surfaces
Some commenters also recommended a higher minimum height of 29 inches instead of 28 inches to allow a more comfortable knee clearance. Response....
-
11B-410.7 Landing size
ETA Editor's Note There are no requirements for landing size in 2010 ADA Standards, although the door maneuvering clearance requirements at 404.2.4 should be applicable outside the platform...
-
M301.4 Lift Compatibility
M301.4 Lift Compatibility M01.4.1 Clearance in Base Proposed requirement: The base of the equipment shall provide a clearance 44 inches (1120 mm) wide minimum, 6 inches (150 mm)...
-
Disability Access - Tips for the small business
California Commission on Disability Access http://www.ccda.ca.gov
-
11B-604.8.1.1.1 Maneuvering space with in-swinging door
In a wheelchair accessible compartment with an in-swinging door, a minimum 60 inches (1524 mm) wide by 36 inches (914 mm) deep maneuvering space shall be provided in front of the clearance...
