Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element....
Search Results "Toe Clearance"
-
11B-306.1 General
-
Polling place violations that can be remediated with temporary measures
Building Entrance: The pull side of the entrance door does not provide at least 18 inches clearance to the side of the latch (1991 ADA Stds 4.13.6, Fig. 25; 2010 ADA Stds 404.2.4)...
-
Door Swing: ADA Standard Section 603.2.3
Section 603.2.3 covers the current ADA Standards for door swings at clear floor space and clearances at fixtures in toilet and bathing rooms.
-
11B-809.2.2 Turning space
It is generally acceptable to use required clearances to provide wheelchair turning space....
-
11B-809.2.2 Turning space
It is generally acceptable to use required clearances to provide wheelchair turning space....
-
NYC Board of Elections: Video 3 - Accessibility Clerk Responsibilities
-
Executive Summary
Key requirements apply to clear floor area, reach limits, knee and toe clearances and maneuvering clearances....
-
Figure 604.3.2 (Exception) Overlap of Water Closet Clearance in Residential Dwelling Units – Drawing from the U.S. Access Board
-
Pilot Rock RT Series End Accessible Recycled Plastic Picnic Table
This design meets or exceeds the current ADA guidelines for wheelchair accessibility and provides wheelchair access at one end (30" wide, 27" under table top and 19" knee plus 5" toe clearances...
-
Attachment I: Program Access in Existing Facilities
Attachment I: Program Access in Existing Facilities
-
Medical Diagnostic Equipment Accessibility Standards Sub-Committee Recommendations Weight Scales
Technical Criteria Types Of Equipment To Which Technical Criteria Applies Seated in a wheelchair (M303) Wheelchair space, including orientation, width, depth, knee and toe...
-
New Construction
Designers should use the Chapter 3 building blocks that address reach ranges, knee and toe clearance, clear floor space, protruding objects and operable parts when designing the space....
-
AISLE
., that provides clearances in compliance with this code....
-
AISLE
., that provides clearances in compliance with this code....
-
11B-603.2.3 Door swing
Doors shall not swing into the clear floor space or clearance required for any fixture....
-
11B-603.2.3 Door swing
Doors shall not swing into the clear floor space or clearance required for any fixture....
-
Grab Bars: ADA Standard Section 1009.4.5
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
-
SCIFIT Recumbent Bikes - ISO1000R & ISO7000R
Featuring a true step-through design with 23 inches of clearance, SCIFIT recumbent bikes provide easy access for all users....
-
Transfer Entry: ADA Standard Section 1002.5.3
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
11B-1002.5.3 Transfer entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
11B-1002.5.3 Transfer entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
11B-1009.4.5 Grab bars
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
-
11B-1009.4.5 Grab bars
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
-
Section 6.0 Conclusions
Knee and toe clearances: Current U.S. standards for knee and toe clearances do not accommodate a majority of participants in our sample. 10.Maneuvering clearances: A significant proportion...
