Handrail gripping surfaces shall have a cross section complying with Section 11B-505.7.1 or 11B-505.7.2....
Search Results "Surface Slope"
-
11B-505.7 Cross section
-
Alterations/ Historic Preservation
Steeper slopes are allowed for short ramps where a 1:12 slope is not technically feasible....
-
405.9.1 Extended Floor or Ground Surface
The floor or ground surface of the ramp run or landing shall extend 12 inches (305 mm) minimum beyond the inside face of a handrail complying with 505....
-
Carpet [4.5.3]
Carpeting can significantly increase the amount of force needed to propel a wheelchair over a surface....
-
403.1 General
Walking surfaces that are a part of an accessible route shall comply with 403....
-
403.1 General
Walking surfaces that are a part of an accessible route shall comply with 403....
- Figure 1009.2.3 Clear Deck Space at Pool Lifts – Drawing from the U.S. Access Board
- SuperDeck Nature Trail
-
11B-403.1 General
Walking surfaces that are a part of an accessible route shall comply with Section 11B-403....
-
403.1 General
Walking surfaces that are a part of an accessible route shall comply with 403....
-
11B-403.1 General
Walking surfaces that are a part of an accessible route shall comply with Section 11B-403....
-
11B-403.1 General
Walking surfaces that are a part of an accessible route shall comply with Section 11B-403....
- Segno ADA Table #3521
-
4.1.2(4)
(4) Ground surfaces along accessible routes and in accessible spaces shall comply with 4.5....
-
4.9.4(4)
(4) Gripping surfaces shall be uninterrupted by newel posts, other construction elements, or obstructions....
-
4.1.1(4)
(4) Ground surfaces along accessible routes and in accessible spaces shall comply with 4.5....
-
5.3.6 Entrance
The entrance to the toilet shall be level with the surrounding surface....
-
1005.3.2 Extended Ground or Deck Surface
1005.3.2 Extended Ground or Deck Surface. The ground or deck surface shall extend 12 inches (305 mm) minimum beyond the inside face of the railing....
-
Rough Form and Foundation Inspection
building form elevations are set relative to site features (accessible routes, accessible parking, common and public use areas, and other site arrival points) to ensure correct accessible slopes...
-
Rough Form and Foundation Inspection
building form elevations are set relative to site features (accessible routes, accessible parking, common and public use areas, and other site arrival points) to ensure correct accessible slopes...
-
§ 38.23(c)(2) Ramp surface
(2) Ramp surface....
-
§ 38.83(c)(2) Ramp surface
(2) Ramp surface....
-
5.2.3 Transfer Surface Measurement
5.2.3 Transfer Surface Measurement. The transfer surface should be measured from the center-point of each side of the transfer surface....
-
§ 38.125(c)(2) Ramp surface
(2) Ramp surface....