Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
Search Results "Non-Glare Finish"
-
404.2.7 Door and Gate Hardware
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
11B-407.2.1.1 Height
[2010 ADAS] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline of...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-604.7.2 Disposal units
The disposal unit shall be located below the grab bar with the opening of the disposal unit 19 inches minimum (483 mm) above the finish floor....
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-407.2.1.1 Height
[2010 ADA Standards] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline...
-
§382.121(a)(3)
prescription medications and any medical devices needed to administer them such as syringes or auto-injectors, vision-enhancing devices, and POCs, ventilators and respirators that use non-spillable...
-
§382.127(e)
(e) You must not disconnect the battery on wheelchairs or other mobility devices equipped with a non-spillable battery completely enclosed within a case or compartment integral to the design...
-
C. Contrast
(Note: reflective signs are permitted if they are in addition to non-reflective signs.)...
-
III. Proposed Action/Summary
Proposed Action/Summary The Department is seeking information to assist it in determining if it should propose specific accessibility requirements for non-fixed equipment and furniture...
-
N. PROGRAM MODIFICATIONS
Access to County Programs Housed in Non-County Owned Facilities: To ensure that the County’s programs, services, and activities that are the subject of this Consent Decree and that...
-
§1193.37 Information pass through.
Telecommunications equipment and customer premises equipment shall pass through cross-manufacturer, non-proprietary, industry-standard codes, translation protocols, formats or other information...
-
Attachment I
The top of the toilet seat measures 20 ½ inches above the finished floor. Provide a toilet with a seat that measures 17 to 19 inches above the finished floor. ...
-
Slip Resistance
Compliance with the standards requires specifying surface materials, textures, or finishes that prevent or minimize slipperiness under the conditions likely to be found on the surface....
-
11B-604.7 Dispensers and disposal units
The outlet of the dispenser shall be below the grab bar, 19 inches (483 mm) minimum above the finish floor and shall not be located behind grab bars....
-
Section-by-Section Analysis
An appendix provides examples of non-mandatory strategies for addressing these guidelines....
-
T402.7 Edge Guards
bridgeplates shall provide edge guards continuously along each side of the ramp or bridgeplate to within 3 inches (75 mm) of the end of the ramp or bridgeplate that is deployed furthest from the non-rail...
-
502.2 Documented Accessibility Features (Section-by-Section Analysis)
that are defined in the platform documentation as accessibility features would be required to conform to requirements in accompanying subsections related to user control (502.2.1) and non-disruption...
-
§1193.51(d) TTY connectability
Products which provide a function allowing voice communication and which do not themselves provide a TTY functionality shall provide a standard non-acoustic connection point for TTYs....
-
N. PROGRAM MODIFICATIONS
Access to County Programs Housed in Non-County Owned Facilities: To ensure that the County’s programs, services, and activities that are the subject of this Consent Decree and that are...
-
AJW Architectural Products US130-A Series US130-A12 12" Exposed Flange, 1.5" Diameter Security Grab Bar - Configuration A
Non-Security option available. See model number UG130-A. Product Specs Tubing: Fabricated of #18 ga stainless steel with a #4 satin finish and 1 1/2" outside diameter....
