Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured...
Search Results "Non-Glare Finish"
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
-
STORY
If the finished floor level directly above a basement or unused under-floor space is more than six feet (1829 mm) above grade for more than 50 percent of the total perimeter or is more than...
-
11B-308.3.2 Obstructed high reach
Exceptions: The top of washing machines and clothes dryers shall be permitted to be 36 inches (914 mm) maximum above the finish floor....
-
11B-704.4.1 Height
When in use, the touch surface of TTY keypads shall be 34 inches (864 mm) minimum above the finish floor....
-
11B-704.4.1 Height
When in use, the touch surface of TTY keypads shall be 34 inches (864 mm) minimum above the finish floor....
-
11B-606.3 Height
Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (864 mm) maximum above the finish floor or ground....
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured...
-
STORY
If the finished floor level directly above a basement or unused under-floor space is more than six feet (1829 mm) above grade for more than 50 percent of the total perimeter or is more than...
-
Obstructed High Reach: ADA Standard Section 308.3.2
Section 308.3.2 covers the current ADA Standards for obstructed high side reach.
-
11B-308.3.2 Obstructed high reach
Exceptions: The top of washing machines and clothes dryers shall be permitted to be 36 inches (914 mm) maximum above the finish floor....
-
11B-606.3 Height
Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (864 mm) maximum above the finish floor or ground....
-
F201.4 Requirements Apply to Facilities Constructed or Altered by or on Behalf of Federal Agencies
The requirements in F216.13, F244 through F248, and 1011 through 1019 shall apply only to facilities constructed or altered by federal agencies or by non-federal entities on federal land...
-
F201.4 Requirements Apply to Facilities Constructed or Altered by or on Behalf of Federal Agencies
The requirements in F216.13, F244 through F248, and 1011 through 1019 shall apply only to facilities constructed or altered by federal agencies or by non-federal entities on federal land...
-
Protruding objects and vitrines
Add aprons, extend bases, or add barriers below objects and vitrines that project more than 4" from walls and have their leading edges greater than 27" and less than 80" above the finished...
-
4.30.3 Character Height
Height Above Finished Floor Minimum Character Height Suspended or Projected Overhead in compliance with 4.4.2 3 in (75mm) minimum...
-
§ 36.303(g)(1)(v) Closed movie captioning
(v) Closed movie captioning means the written display of a movie's dialogue and non-speech information, such as music, the identity of the character who is speaking, and other sounds or...
-
§ 36.303(g)(1)(v) Closed movie captioning
(v) Closed movie captioning means the written display of a movie's dialogue and non-speech information, such as music, the identity of the character who is speaking, and other sounds or...
-
Temporary Signage
Temporary Signage Temporary signs, which are exempt, include identification of tenancies, names and titles of room occupants, non-fixed signage and temporary postings ("Out of Service...
-
2.4.2
2.4.2 When defining acceptable methods of correction for a non - complying element, give reasonable consideration to how the remedial action may affect construction time, cost, adjacent...
-
Employee Work Area - Reasoning Behind Code?
I understand how approach, entry & exit helps to facilitate future individual accommodations and provides access for non-employees who would not be covered under Title I (ie inspectors...
-
904.3.2 Counter
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
407.2.1.1 Height
EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline of the highest operable...
-
604.9.5 Flush Controls
Hand operated flush controls shall comply with 309.2 and 309.4 and shall be installed 36 inches (915 mm) maximum above the finish floor....
-
11B-605.2 Height and depth
Urinals shall be the stall-type or the wall-hung type with the rim 17 inches (432 mm) maximum above the finish floor or ground....