The SARGENT® 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards....
Search Results "Finished Grade"
-
Sargent 10 Line Cylindrical Lock
-
1134A.8 Lavatories, vanities, mirrors and towel fixtures
The top of the fixture rim shall be a maximum of 34 inches (864 mm) above the finished floor. 2. Floor space....
-
608.2.1 Transfer Type Shower Compartments
Note: Inside finished dimensions measured at the center points of opposing sides Figure 608.2.1 Transfer Type Shower Compartment Size and Clearance...
-
610.2 Bathtub Seats
The top of bathtub seats shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor....
-
D. Signage
signage will be relocated to between 48 inches measured to the baseline of the lowest tactile character and 60 inches measured to the baseline of the highest tactile character above the finish...
-
407.2.2.2 Visible Signals
Visible signal fixtures shall be centered at 72 inches (1830 mm) minimum above the finish floor or ground....
-
11B-603.5 Accessories
All operable parts, including coin slots, shall be 40 inches (1016 mm) maximum above the finish floor....
-
11B-603.5 Accessories
All operable parts, including coin slots, shall be 40 inches (1016 mm) maximum above the finish floor....
-
Behavioral Safety Products #DH510 Mortise Ligature Resistant Integrated Door Lever
The DH510 is available in 36 functions, is Grade 1, is UL Listed, is ADA Compliant, and Patent Pending....
-
11B-403.3 Slope
Exception: The running slope of sidewalks shall not exceed the general grade established for the adjacent street or highway. Advisory 11B-403.3 Slope....
-
11B-403.3 Slope
Exception: The running slope of sidewalks shall not exceed the general grade established for the adjacent street or highway. Advisory 11B-403.3 Slope....
-
1013.2 Where required
along open-sided walking surfaces, including mezzanines, equipment platforms, stairs, ramps and landings that are located more than 30 inches (762 mm) measured vertically to the floor or grade...
-
R302.7 Surfaces
The surface requirements in R302.7 apply to sidewalks and other pedestrian circulation paths, pedestrian street crossings and at-grade rail crossings, pedestrian overpasses and underpasses...
-
Qualified individual with a disability
See also footnote 4 (noting that this resource guide addresses students from kindergarten through 12th grade). ...
-
Scenario 9 – Unjustified Different Treatment
His fourth-grade class is going on a field trip to the local aquarium and Ricardo’s father is told that he must chaperone Ricardo on the trip because the teachers will be very busy and cannot...
-
Technical Infeasibility
an accessible stall would violate the plumbing code’s required fixture count); meeting slope requirements on existing developed sites located on steep terrain where necessary re-grading...
-
1015.2 Where required
open-sided walking surfaces, including mezzanines, equipment platforms, aisles, stairs, ramps and landings that are located more than 30 inches (762 mm) measured vertically to the floor or grade...
-
Allegion LCN 3130 Series Overhead Concealed Door Control
The single lever arm and roller assembly provides complete concealment and the choice of finishes and track functions meet virtually all architectural requirements. ...
-
11B-405.9.2 Curb or barrier
inches (51 mm) high minimum, or barrier shall be provided that prevents the passage of a 4 inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish...
-
606.3 Height
Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (865 mm) maximum above the finish floor or ground. EXCEPTIONS: 1....
-
4.35.4 Bench
The bench shall be mounted 17 in to 19 in (430 mm to 485 mm) above the finish floor....
-
9.5 LOCKER ROOMS
., intended for use by people in wheelchairs shall be located no higher than 48 in (1220 mm) above the finished floor....
-
Signs [ADA Standards §216, §703]
Visual criteria address the height, style, proportion, and spacing of characters, as well as finish and contrast, line spacing, and other features (§703.5)....
