Search Results "Exit Ramp"

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-703.5.2 Case

  Characters shall be uppercase or lowercase or a combination of both.

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-703.1.1 Plan review and inspection

  Signs as specified in Section 11B-703, or in other sections of this code, when included in the construction of new buildings or facilities, or when included, altered or replaced due...

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1190, Proposed Accessibility Guidelines for Pedestrian Facilities in the Public Right-of-Way: Notice of Proposed Rulemaking (NPRM)
  R304.5.3 Cross Slope

  The cross slope of curb ramps, blended transitions, and turning spaces shall be 2 percent maximum....

• Federal Documents > Preamble to Guidelines > 36 CFR Part 1192 Americans with Disabilities Act (ADA) Accessibility Guidelines for Transportation Vehicles (2016 Non-Rail Vehicle Guidelines) - Preamble
  T202 Accessible Means of Boarding and Alighting

  Provision of accessible boarding and alighting may be accomplished through the use of ramps and bridgeplates, lifts, or level boarding and alighting systems that meet the technical requirements...

• State and Local Documents > State Technical Assistance > Code Application Notice (CAN) 2-11B, 09-09-2014
  11B-203 General exceptions

  shall only be required to comply with Sections 11B-206.2.8, 11B-207.1, and 11B-215.3 and shall be designed and constructed so that individuals with disabilities can approach, enter, and exit...

• Additional Access Publications > ADA Checklist for Existing Facilities
  Priority 1: Approach & Entrance

    Word Fillable Form (1.5MB) Word Non-Fillable Form (1.3MB) PDF Non-Fillable Form (0.8MB)

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  F216 Signs

  [See subsections ...]

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  703.4.1 Height above Finish Floor or Ground

  Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60...

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-703 SIGNS

  [See subsections ...]

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-703.4.1 Height above finish floor or ground

  Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60...

• Federal Documents > Preamble to Guidelines > 36 CFR Parts 1190 and 1191 ADA and ABA Accessibility Guidelines - Preamble (Discussion of Comments and Changes)
  703 Signs

  Requirements for signs provide specifications for raised characters (703.2), braille characters (703.3), the height and location of signs with tactile characters (703.4), visual...

• Federal Documents > Preamble to Guidelines > 36 CFR Parts 1190 and 1191 ADA and ABA Accessibility Guidelines - Preamble (Discussion of Comments and Changes)
  Mounting Height and Location

  Section 703.4 covers the mounting height and location of signs with tactile characters. Such signs are to be mounted so that the tactile elements (raised characters and braille) are...

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  703 Signs

  [See subsections ...]

• Federal Documents > Preamble to Guidelines > 36 CFR Parts 1190 and 1191 ADA and ABA Accessibility Guidelines - Preamble (Discussion of Comments and Changes)
  216 Signs

  Scoping requirements for signs cover room designations (216.2) and directional and informational signs (216.3). The guidelines also include provisions specific to certain elements...

• State and Local Documents > Codes and Standards > 2012 Texas Accessibility Standards
  703 Signs

  [See subsections ...]

• State and Local Documents > Codes and Standards > 2012 Texas Accessibility Standards
  216 Signs

  [See subsections ...]

• State and Local Documents > Codes and Standards > 2012 Texas Accessibility Standards
  703.4.1 Height Above Finish Floor or Ground

  Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60...

• Federal Documents > Technical Assistance > ADA Checklist for New Lodging Facilities
  VI. Interior Signs...

  [See subsections ...]

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  216 Signs

  216 Signs

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  703 Signs

  703 Signs

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  703.4.1 Height above Finish Floor or Ground

  703.4.1 Height above Finish Floor or Ground. Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the...

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-216 SIGNS

  [See subsections ...]