D. Are the food, drink, condiments and tableware dispensers (juice, coffee, cereal units, condiments, forks, knives, etc.) without: ...operational controls or dispensers higher...
Search Results "Transfer Device (Amusement Rides)"
-
D. Reach Range
-
§ 38.159 Mobility aid accessibility
[63 FR 51698, 51703, Sept. 28, 1998]
-
§ 38.125 Mobility aid accessibility
[56 FR 45756, Sept. 6, 1991, as amended at 58 FR 63103, Nov. 30, 1993; 76 FR 57939, Sept. 19, 2011]
-
608.7 Thresholds
In transfer type shower compartments, thresholds 1/2 inch (13 mm) high maximum shall be beveled, rounded, or vertical....
-
1009.4.1 Clear Deck Space
A clear deck space of 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer wall....
-
21. BRAND STANDARDS, QUALITY ASSURANCE INSPECTIONS
(vi) The required number of permanent or portable visual alarms and notification devices for incoming telephone calls and door knock or bell to ensure that the hotel can fully equip the...
-
Section 37.165 Lift and Securement Use
All people using wheelchairs, as defined in the rule, and other powered mobility devices, under the circumstances provided in the rule, are to be allowed to ride the entity's vehicles....
-
§ 38.95(a)(1) General
All new commuter rail cars, other than level entry cars, covered by this subpart shall provide a level-change mechanism or boarding device (e.g., lift, ramp or bridge plate) complying with...
-
M302.2 Transfer Surface (Section-by-Section Analysis)
This is an introductory section.
-
11B-220 AUTOMATIC TELLER MACHINES, FARE MACHINES AND POINT-OF-SALE DEVICES
[2010 ADAS] 220 Automatic Teller Machines and Fare Machines ETA Editor's Note The ADA requirements included at Section 11B-220 are provided for information only. The 2013...
-
11B-220 Automatic teller machines, fare machines and point-of-sale devices.
[2010 ADAS] 220 Automatic Teller Machines and Fare Machines
-
Height
The Access Board is considering whether 6 inches minimum and 19 inches maximum above the transfer surface would be an appropriate height for transfer supports on diagnostic equipment used...
-
Participants
Further demographic details of the study can be seen in Table 3, including hours using a wheelchair per day, years using a wheelchair, number of level and non-level transfers and average...
-
§382.127 What procedures apply to stowage of battery-powered mobility aids?
[See subsections ...]
-
§ 36.311(b)
(b)
-
3.6. Replacement Costs
Section 3.6.2 discusses the assumptions and research regarding the rate of device replacement....
-
iv. Lifts
Lifts Medical providers may need lifts to transfer some patients with mobility disabilities safely to examination or treatment tables or chairs or to gurneys or hospital beds....
-
Radiologic Equipment
The accessibility issues related to transfer to the surface are similar to those addressed previously under Examination Tables and Chairs....
-
4.1.2. Upfront Costs
Discounted at 7 Percent ($ millions) Venue Type Captioning Hardware Acquisition Costs Audio Hardware Acquisition Costs Captioning Device...
-
A4.17.3 Size and Arrangement
A standard stall provides a clear space on one side of the water closet to enable persons who use wheelchairs to perform a side or diagonal transfer from the wheelchair to the water closet...
-
Section 1193.51 Compatibility [1193.41 in the NPRM] (Section-by-Section Analysis)
premises equipment and peripheral devices where they are needed but do not yet exist....
-
§382.123 What are the requirements concerning priority cabin stowage for wheelchairs and other assistive devices?
[Doc. No. DOT-OST-2004-19482, 73 FR 27665, May 13, 2008, as amended at 78 FR 67924, Nov. 12, 2013]
-
5.4.4 Transfer Support Distance From Transfer Surface for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
5.4.4 Transfer Support Distance From Transfer Surface for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position....
-
M301.2.1 Height
The height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured from the floor to the top of the transfer surface....