The PBR 4.5 series is a smaller solution to the standard 6 inch PR series push plates. This 4½ inch design features the same functionality as the 6" plate but is simply available in...
Search Results "Door Opening Angle"
Commonly Searched Documents
- BEA Inc. PBS45 Series Door Access 4.5" Square Push Plate (Push to Open)
- BEA Inc. EMS475 Series Door Access 4.75" Square Panther Plate (Push to Open)
- BEA Inc. PBR45 Series Door Access 4.5" Round Push Plate (Push to Open)
-
1132A.4, Item 4
Secondary exterior doors onto decks, patios or balcony surfaces constructed of impervious materials (e.g., concrete, brick, flagstone) may have a maximum change in height from the interior...
- BEA Inc. PBJ Series Jamb Style Push Plates (Push to Open)
- Besam SL500 Surface Mount Automatic Sliding Door
-
C. Toilet Rooms:
PSE shall provide at least seventeen (17) ambulatory accessible and/or 60-inch wide accessible toilet compartments with an outward swinging, self-closing door disbursed as set forth in the...
-
M7
If the door swings into the room, does the door swing not overlap the required clear floor space for the toilet or lavatory?...
- Stanley SB600 Bifolding Door
- Besam SL500 Overhead Concealed Automatic Sliding Door
- SlabGasket Expansion Joint Replacement
-
What is an Expansion Joint Test Kit
Requires the Registered User plan or above. Login!
-
Repairing Expansion Joints - GapArmour Basics
Requires the Registered User plan or above. Login!
- NanoPave® 2-in-1 Joint Stabilizer and Sealer
-
Filling expansion joints by GapArmour.com
Requires the Registered User plan or above. Login!
-
11B-603.2.3 Door swing
SECTION TITLE NOTES 11B-603.2.3 Door swing....
-
T204.4 Doorways with Steps on Over-the-Road Buses
On over-the-road-buses, doorways with steps shall comply with T502.4.
-
Locks and Security Devices
Locks and Security Devices Permanently fixed portions of locks, including key locks, bolts, card readers, and push-button devices with number codes for general use by building...
-
4.8.4* Landings
Ramps shall have level landings at bottom and top of each ramp and each ramp run. Landings shall have the following features:
-
4.8.4 LANDINGS
Ramps shall have level landings at the bottom and top of each run. Landings shall have the following features: (1) The landing shall be at least as wide as the ramp run leading to...
-
§ 38.53(a) Clear width
(a) Clear width.
-
§ 38.73(a) Clear width
(a) Clear width—
-
§ 38.113 Doorways
[See subsections ...]