Providing the full 2'6'' depth at the lower counter would provide an equal sized counter but I could argue that 18'' deep would also work....
Search Results "Sink Depth"
Filters
Commonly Searched Documents
-
Re: Service Counters
-
TABLE OF CONTENTS
Toilet Stalls 4.18 Urinals 4.19 Lavatories and Mirrors 4.20 Bathtubs 4.21 Shower Stalls 4.22 Toilet Rooms 4.23 Bathrooms, Bathing Facilities, and Shower Rooms 4.24 Sinks...
-
11B-213.3.1 Toilet compartments
A lavatory is a sink provided for hand washing....
-
1125B.3
Where the distance from the wheelchair to the clothes rod or shelf exceeds 10 inches (254 mm), as in closets without accessible doors, the height and depth to the rod or shelf shall comply...
-
1134A.7, Item 1
may be reduced to 36 inches (914 mm) for lavatories, cabinets, wing walls, or privacy walls located immediately adjacent to a water closet which extend no more than 24 inches (610 mm) in depth...
-
Clearance Around Base (M301.4.2 and M302.4.2)
base permitted within this clearance would be 26 inches wide maximum at the edge of the examination surface and is permitted to increase at a rate of 1 inch in width for each 3 inches in depth...
-
Part 12- Access Methods - Using External Switches
Access options Configuring Proloquo2Go for an external switch(es) Scan modes - Automatic Step Scanning and Inverse Scanning Note: There is a separate e-Learning video that provides an in-depth...
-
Grainger Tough Guy Stainless Steel Sanitary Napkin Receptacle, 11" Height
1609 UNSPSC# 47121702 Shipping Weight: 3.28 lbs Technical Specs Item Sanitary Napkin Receptacle Container Mounting Style Wall or Free-Standing Height 11" Container Depth...
-
Bobrick TrimLineSeries Recessed Soap Dispenser B-306
Rough Wall Opening: 8 3/8" W, 4 3/8" H, 3 7/8" min. depth (215 x 110 x 100mm)....
-
Bobrick Recessed Multi-Roll Toilet Tissue Dispenser B-4388
Rough Wall Opening: 6 1⁄4" W, 11 1⁄4" H, 3 1⁄4" min. depth (160 x 285 x 85mm)....
-
Boolee Voting Booth
fasteners are zinc plated All side panel fabric is 300 x 300 urethane-coated polyester Design Specifications All weights and measures subject to minor variations Height: 60: Depth...
-
Re: Section 307 Protruding Objects
The (maximum) depth of a shelf isn't noted, but you're unlikely to find many shelves less than 4" deep....
-
Hager Companies 36" Low Profile Actuator 2-659-0178 - Wireless
: - Wireless - Graphics embossed onto the faceplate for durability - Mounts to any flat surface - Weather resistant Features: - 36" x 36" activation area and low profile 1" depth...
-
Bobrick Recessed Medicine Cabinet B-397
Rough Wall Opening: 14" W, 23 5/8" H, 3 1/2" min. depth (355 x 600 x 90mm)....
-
Hager Companies 36" Low Profile Actuator 2-659-0179 - Hard Wired
Hard wired - Graphics embossed onto the faceplate for durability - Mounts to any flat surface - Weather resistant Features: - 36" x 36" activation area and low profile 1" depth...
-
Priority 2: Access to Goods & Services
Word Fillable Form (2.5MB) Word Non-Fillable Form (2.4MB) PDF Non-Fillable Form (1.4MB)
-
Lateral grab bar use
Table 12 summarizes the average clear space required for our subjects to position their WMD to perform a transfer in each protocol in terms of width, depth, and angle of approach (Figure...
-
Stabilizer
Stabilizer arrives pre-mixed with ¼ inch minus aggregate and is applied at a 3-inch depth on top of the base....
-
Curb Ramps at Marked Crossings and Vehicular Lanes
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum...
-
Benches
Benches must have seats that are a minimum of 20 inches to a maximum of 24 inches in depth and 42 inches minimum in length....
-
307 Protruding Objects
., higher than 27 inches from the floor) and below the standard head room clearance (80 inches), are limited to a 4 inch depth....
-
Summary
Summary The following report provides a brief analysis of four anthropometric dimensions which were considered relevant to the width and depth dimensions of a seating surface for wheeled...
-
711.3.2 Membrane penetrations
By a horizontal distance of not less than the depth of the wall cavity where the wall cavity is filled with cellulose loose-fill or mineral fiber insulation; 1.3....
-
Typical Issues
Access aisle depth is at least 5 feet. 2. Access aisle length is at least 20 feet. 3....
