Handrail gripping surfaces and any surfaces adjacent to them shall be free of sharp or abrasive elements and shall have rounded edges....
Search Results "Side Transfer Surface"
Filters
Commonly Searched Documents
-
11B-505.8 Surfaces
-
Accessible Surfaces Located In The Use Zone
Accessible Surfaces Located In The Use Zone If located within the use zone, accessible ground surfaces must also be impact attenuating and meet ASTM F 1292-04 Standard Specification for...
-
1008.3.2.2 Height
Each transfer step shall be 8 inches (205 mm) high maximum....
-
StormPave Permeable Clay Pavers Installation Video 2 (Compaction)
Requires the Registered User plan or above. Login! -
StormPave Permeable Clay Pavers Installation Video
Requires the Registered User plan or above. Login! -
Floor Height [1013.4]
If the tent platform floor is raised above grade, the floor height must be no more than 19 inches when measured from the clear ground space to the tent platform surface....
-
Miracle Sealant Company 511 Anti-Slip Formula
Tile • Grout • Porcelain Tile • Slate 511 Anti-Slip Formula is a penetrating sealer designed for the anti-slip protection of all tile and stone surfaces...
-
Aluminum Flush Top SGF Series Pressure-Locked Grating
SGF Series Maximum walking surface, cosmetic appeal, economy of shop fabrication and ease of field alteration make the aluminum flush top series the premier choice when pressure locked...
-
Side Reach [4.2.6]
High and low reaches are based on a depth of reach no greater than 10 inches measured from the available clear floor space. It is important that clear floor space be available at...
-
Figure 1009.5.4 Transfer Steps – Drawing from the U.S. Access Board
-
Access Board: Maneuvering Clearances at Doors
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
11B-404.2.4.3 Recessed doors and gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the...
-
11B-404.2.4.3 Recessed doors and gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the...
-
11B-404.2.4.3 Recessed doors and gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the...
-
Rotational Penetrometer
It can be used easily in the field, is suitable for trail use, and does not require a level surface for testing....
-
11B-306.3.4 Clearance reduction
Exception: The knee clearance shall not be reduced at built-in dining and work surfaces required to be accessible by Section 11B-226.1....
-
11B-306.3.4 Clearance reduction
Exception: The knee clearance shall not be reduced at built-in dining and work surfaces required to be accessible by Section 11B-226.1. ...
-
11B-306.3.4 Clearance reduction
Exception: The knee clearance shall not be reduced at built-in dining and work surfaces required to be accessible by Section 11B-226.1....
-
Hager Companies Door Protection Plate 220S
Materials: - Aluminum, brass, bronze, stainless steel Options: - Self-adhesive tape available on all plates - Spanner head screws - Torx head screws - Round corners - Wrap around side...
-
Hager Companies Door Protection Plate 214S
Door Protection Plate 214S 0.125" gauge with 4-sided bevel Materials: - Plastic Laminate NFPA Notes: - Self-adhesive tape available on all plates - Spanner head screws...
-
Methods for Placing a Slope Tool on the Surface
There are several methods that can be used for measuring slopes and cross slopes with a digital slope meter. Each method has advantages and disadvantages.
-
4. Assess During the Planning, Installation and Maintenance Phases
One method to assess the ground level route using the photo above would be to look at each route segment, such as: From the entry of the play area where the surface begins to the transfer...
-
Radiologic Equipment
Most of these technologies require the patient to lie on a flat surface that is part of the equipment....
-
What is the minimum level of slip resistance required by the standards?
The standards require ground and floor surfaces to be slip resistant, but they do not specify a minimum level of slip resistance or coefficient of friction. ...
