The handrail requirements in section 505 address specifications for continuity, height, clearance, gripping surface, cross section, fittings, and extensions....
Search Results "Side Transfer Surface"
Commonly Searched Documents
-
Handrails Requirement
-
Alignment: ADA Standard Section 802.3.1
The floor surface of the companion seat shall be at the same elevation as the floor surface of the wheelchair space....
-
11B-802.3.1 Alignment
The floor surface of the companion seat shall be at the same elevation as the floor surface of the wheelchair space....
- Unity Surfacing Systems Play-Land Safety Surfacing
-
1008.3.2.2 Height
Each transfer step shall be 8 inches (205 mm) high maximum....
-
1008.3.2.2 Height
Each transfer step shall be 8 inches (205 mm) high maximum....
-
11B-1008.3.2.2 Height
Each transfer step shall be 8 inches (203 mm) high maximum....
-
11B-1008.3.2.2 Height
Each transfer step shall be 8 inches (203 mm) high maximum....
-
11B-1008.3.2.2 Height
Each transfer step shall be 8 inches (203 mm) high maximum....
-
A Longitudinal Study of Playground Surfaces to Evaluate Accessibility - Final Report
A LONGITUDINAL STUDY OF PLAYGROUND SURFACES TO EVALUATE ACCESSIBILITY Final Report October 2013 Staff Liaison Peggy Greenwell U.S....
-
Doors
DOORS 32” clear width 11B-404.2.3 Maneuvering clearances 11B-404.2.4.1 Level landings each side...
-
Doors
DOORS 32” clear width 11B-404.2.3 Maneuvering clearances 11B-404.2.4.1 Level landings each side...
-
904.3.3 Check Writing Surfaces
Where provided, check writing surfaces shall comply with 902.3....
-
904.3.3 Check Writing Surfaces
Where provided, check writing surfaces shall comply with 902.3....
-
11B-505.8 Surfaces
Handrail gripping surfaces and any surfaces adjacent to them shall be free of sharp or abrasive elements and shall have rounded edges....
-
11B-505.8 Surfaces
Handrail gripping surfaces and any surfaces adjacent to them shall be free of sharp or abrasive elements and shall have rounded edges....
-
11B-505.8 Surfaces
Handrail gripping surfaces and any surfaces adjacent to them shall be free of sharp or abrasive elements and shall have rounded edges....
-
Accessible Surfaces Located In The Use Zone
Accessible Surfaces Located In The Use Zone If located within the use zone, accessible ground surfaces must also be impact attenuating and meet ASTM F 1292-04 Standard Specification for...
-
1008.3.2.2 Height
Each transfer step shall be 8 inches (205 mm) high maximum....
-
StormPave Permeable Clay Pavers Installation Video 2 (Compaction)
Requires the Registered User plan or above. Login!
-
StormPave Permeable Clay Pavers Installation Video
Requires the Registered User plan or above. Login!
-
Floor Height [1013.4]
If the tent platform floor is raised above grade, the floor height must be no more than 19 inches when measured from the clear ground space to the tent platform surface....
-
Side Reach [4.2.6]
High and low reaches are based on a depth of reach no greater than 10 inches measured from the available clear floor space. It is important that clear floor space be available at...
- Figure 1009.5.4 Transfer Steps – Drawing from the U.S. Access Board