Where food or drink is served for consumption at a counter exceeding 34 inches (864 mm) in height, a portion of the main counter 60 inches (1525 mm) minimum in length shall be provided in...
Search Results "High-Low Drinking Fountain"
-
11B-226.3 Dining surfaces exceeding 34 inches in height
-
K4
If built-in food, drink, condiment, and tableware dispensers are provided, are dispensers and operating controls mounted no higher than 54 inches above the floor if clear floor space is...
-
11B-226.3 Dining surfaces exceeding 34 inches in height
Where food or drink is served for consumption at a counter exceeding 34 inches (864 mm) in height, a portion of the main counter 60 inches (1525 mm) minimum in length shall be provided in...
-
Beneficial Designs High Efficiency Trail Assessment Process (HETAP) Software 3.0 Wheeled Instrumentation Sensor Package for Data Collection
Key HETAP and UTAP Differences HETAP follows the same general principles as its predecessor, UTAP (the Universal Trail Assessment Process). Both collect objective trail...
-
Recommendations for Buffet Meals
Keep chafing dishes for hot food (also known as “chafers”) as low as possible....
-
11B-303.4 Ramps
Changes in level greater than ½ inch (12.7 mm) high shall be ramped, and shall comply with Section 11B-405 or 11B-406....
-
11B-303.4 Ramps
Changes in level greater than ½ inch (12.7 mm) high shall be ramped, and shall comply with Section 11B-405 or 11B-406....
-
Feature 4 - Routes to the Meeting Space
ADA Standards for Accessible Design | Temporary Barrier Removal Suggestions for Accessible Features It is important to note that people who are blind or have low vision may use all routes...
-
4. Results
The sensitivity analyses conducted in this section include cost estimations using the Low Accessibility and the High Accessibility baselines, an alternate Medium Accessibility baseline distribution...
-
A MINIMUM HIGHEST POINT STANDARD OF 19 INCHES IS CONSISTENT WITH EXISTING ACCESSIBILITY STANDARDS
Seats shall not be sprung to return to a lifted position.12 Likewise, 19 inch high benches are accessible: 903.5 Height....
-
Guest Rooms and In-Room Guest Services
Guests who are blind or who have low vision should be offered a thorough orientation to their guest rooms....
-
Clarification on unobstructed side reach limits for interior kiosks
According to the general guidelines, the maximum high side reach should be 48 inches and the low side reach should be at least 15 inches above the finish floor....
-
11B-303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 11B-303.3 Beveled....
-
11B-303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 11B-303.3 Beveled....
-
902 Dining Surfaces and Work Surfaces
Comments considered the term "dining surfaces" insufficient in covering bars where only drinks are consumed....
-
382.113 What services are carriers not required to provide to passengers with a disability on board the aircraft?
Personal care services like assistance in actual eating and drinking are not required, but more limited assistance such as assisting with the opening of packages is required....
-
Table of Contents
F205 Operable Parts F206 Accessible Routes F207 Accessible Means of Egress F208 Parking Spaces F209 Passenger Loading Zones and Bus Stops F210 Stairways F211 Drinking...
-
11B-604.4 Seats
Seats shall be 2 inches (51 mm) high maximum. [2010 ADA Standards] 604.4 Seats....
-
11B-604.4 Seats
Seats shall be 2 inches (51 mm) high maximum. [2010 ADA Standards] 604.4 Seats....
-
Kompan, Inc. M593 - Water Tap
The push of a button allows kids of all ages access to the water tap on this freestanding decorative fountain — without the assistance of adults....
-
M301.2.2 Sunset Provision (Section-by-Section Analysis)
(Significant Changes – Transfer Surface Adjustability), this is a new provision that was added to the final rule in conjunction with the new requirement of a low height range in M301.2.1...
-
M302.2.2 Sunset Provision (Section-by-Section Analysis)
(Significant Changes – Transfer Surface Adjustability), this is a new provision added to the final rule in conjunction with the new requirement of a low height range in M302.2.1....
-
11B-809.8.1 Door Thresholds
Secondary exterior door thresholds, including sliding door tracks, shall be 3/4 inch (19.1 mm) high maximum with a 1:2 maximum slope....
-
References
“Research on Effective Use of Tactile Exhibits with Touch Activated Audio Description for the Blind and Low Vision Audience.”...
