A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
Search Results "High-Low Drinking Fountain"
-
11B-904.4.1 Parallel approach
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
-
Changes in Level and Horizontal Gaps
The referenced vehicle guidelines (like those of the proposed rule) permit the use of mini high platforms, car-borne or platform-mounted lifts, ramps or bridge plates, or manually deployed...
-
11B-407.4.8.1.1 Size
Characters shall be ½ inch (12.7 mm) high minimum....
-
11B-407.4.8.1.1 Size
Characters shall be ½ inch (12.7 mm) high minimum....
-
Size: ADA Standard Section 407.4.8.1.1
Section 407.4.8.1.1 covers the current ADA Standards for size of visible elevator car position indicators.
-
214 and 611 Washing Machines and Clothes Dryers
An exception will permit the maximum height for the tops of these machines to be 2 inches higher than the general requirement for maximum high reach over an obstruction....
-
4.4 Equipment Barriers and Solutions
Barriers Solutions Simple/Low cost Involved / High cost Spaces between the equipment are too narrow Ask staff to move one of each type...
-
Issue 12: What design guidance on natural lighting for low vision persons can be provided in the short term?
Comment by [Participant]: Yeah, but we could come up with a list of what are good practices and designs (in the space) to try and avoid these issues of glare. It gives architects at...
-
Vertical Clearance: ADA Standard Section 307.4
Section 307.4 covers the current ADA Standards for vertical clearance.
-
11B-307.4 Vertical clearance
Vertical clearance shall be 80 inches (2032 mm) high minimum. Guardrails or other barriers shall be provided where the vertical clearance is less than 80 inches (2032 mm) high....
-
11B-307.4 Vertical clearance
Vertical clearance shall be 80 inches (2032 mm) high minimum. Guardrails or other barriers shall be provided where the vertical clearance is less than 80 inches (2032 mm) high....
-
Age and Gender
With all due respect to the youngsters in this room who have low vision, most people with low vision are old. The median age is 75 [- 76] years (slides 21 and 22)....
-
American Standard Soltura 1 Handle Pull Down High Arc Kitchen Faucet with Soap Dispenser 9391.301
Splendor made slender. Our Soltura™ one-handle, pull-down faucet complements kitchens with casual décor. Features include a swivel spout, pull-down spray with push-button activation,...
-
Protruding Objects and Outdoor Recreation Access Routes
access route from the side or from overhead can be hazardous to people who are paying more attention to their companions than the travel route, as well as to people who are blind or have low...
-
Ramps M303:3.3, 3.3.1, 3.3.2
Level changes up to ¼ inch high are permitted to be vertical. Level changes between ¼ inch high and ½ inch high would be required to be beveled with a slope not steeper than 1:2....
-
3.3 Guidance on the Visual Properties of Detectable Warnings
However, low contrast detectable warnings might be sufficient if other methods are be used to increase the visibility of the curb ramp (e.g., if the entire curb ramp contrasts visually with...
-
Height: ADA Standard Section 1008.3.2.2
Each transfer step shall be 8 inches (205 mm) high maximum....
-
11B-411.2.1.2.4.2 Size
Elevator assignment characters shall be 1 inch high (25 mm) minimum....
-
11B-1008.3.2.2 Height
Each transfer step shall be 8 inches (203 mm) high maximum....
-
11B-1008.3.2.2 Height
Each transfer step shall be 8 inches (203 mm) high maximum....
-
Vertical: ADA Standard Section 303.2
Section 303.2 covers the current ADA Standards for vertical changes in level.
-
11B-411.2.1.2.4.2 Size
Elevator assignment characters shall be 1 inch high (25 mm) minimum....
-
Parallel Approach: ADA Standard Section 904.4.1
A portion of the counter surface that is 36 inches (915 mm) long minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided....
