height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the raised...
Search Results "Character Proportion (Raised)"
Filters
Commonly Searched Documents
-
1009.2.4 Seat Height
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars raised...
-
I. Final
In the event that no objections to this Settlement Agreement are raised prior to or at the Fairness Hearing, that any objections that have been raised have been fully and formally withdrawn...
-
4.20.4 Grab Bars
Nonetheless, in both conditions, grab bars are located to help individuals get into the tub and then to lower and raise themselves to and from a seated position....
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars raised...
-
703.6.2 Finish and Contrast
Signs are more legible for persons with low vision when characters contrast as much as possible with their background....
-
703.6.2 Finish and Contrast
Signs are more legible for persons with low vision when characters contrast as much as possible with their background....
-
703.6.2 Finish and Contrast
Signs are more legible for persons with low vision when characters contrast as much as possible with their background....
-
11B-703.6.1 Pictogram field
Characters and Braille shall not be located in the pictogram field. Advisory 11B-703.6.1 Pictogram field....
-
4.3.4 Knee and Toe Clearances
The shaded areas in the figures depict the envelope of the space required by a specified proportion of manual wheelchair users....
-
11B-1009.2.2 Seat location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (406 mm) minimum from the edge of the pool....
-
Seat Height
must be designed so that the seat will make a stop between a minimum of 16 inches and maximum of 19 inches (measured from the deck to the top of the seat surface, when the seat is in the raised...
-
Tactile letters
They also noted the quality of the raised letters was better for some words than others....
-
Fact Based Questions
Questions Participants identified answers correctly an average of 8% more frequently when presented with full round models than with bas-relief models, and 12% more frequently than with raised...
-
Cybex Total Access Treadmill
Features Raised Console Iconography and Color allows easy identification of the main controls both by color, large buttons and text for older users, plus raised iconography for visually...
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
1009.2.2 Seat Location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (405 mm) minimum from the edge of the pool....
-
Ticket Prices
In those situations where it is not readily achievable to remove the barriers in a part of an arena or auditorium, the venue must offer a proportional number of seats in an accessible location...
-
1. Sloped Surfaces
The amount of slope or grade is described as the proportion of a vertical rise to a horizontal length....
-
Defining Disability Broadly
(Reis 2003) As the population ages, as people with disabilities rise in proportion to demographic changes, and as medical and technology advances continue to keep more people with disabilities...
-
Hall Call Buttons [4.10.3]
Recommendation: Buttons that are raised from the faceplate (or trim ring or ferrule) are preferred because they can be activated by other parts of the hand, not just the finger tip....
-
Regulatory Process Matters
Two scenarios were examined to develop an upper and lower bound to represent the proportion expected to be potentially affected by the final rule....
