Adult changing tables shall be fixed to the floor or a wall and shall comply with Section 11B-813.2.1....
Search Results "Barrier Wall"
Filters
Commonly Searched Documents
-
11B-813.2.1 Adult changing table
-
11B-411.4.10 Support rail
Support rails complying with Section 11B-407.4.10 shall be provided on at least one wall of the car....
-
11B-408.4.6 Car controls
Control panels shall be centered on a side wall....
-
11B-809.10.8.3 Cabinets
The finished floor shall extend to the wall under the lavatory....
-
11B-607.4 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped or U-shaped grab bar meeting the dimensional requirements of Section 11B-607.4.1 or 11B-607.4.2...
-
Vertical Clearance: ADA Standard Section 307.4
Section 307.4 covers the current ADA Standards for vertical clearance.
-
11B-307.4 Vertical clearance
Guardrails or other barriers shall be provided where the vertical clearance is less than 80 inches (2032 mm) high....
-
Back Support: ADA Standard Section 903.4
The bench shall provide for back support or shall be affixed to a wall....
-
Grab Bars: ADA Standard Section 607.4
Section 607.4 covers the current ADA Standards for bathtub grab bars.
-
Grab Bars: ADA Standard Section 604.8.2.3
Section 604.8.2.3 covers the current ADA Standards for grab bars in ambulatory accessible compartments.
-
1136A.2 Switch and control heights
If the reach is over a physical barrier or an obstruction (for example, a kitchen base cabinet) switches and controls shall be located within the reach ranges specified in Section 1138A.3...
-
1136A.2 Switch and control heights
If the reach is over a physical barrier or an obstruction (for example, a kitchen base cabinet) switches and controls shall be located within the reach ranges specified in Section 1138A.3...
-
1136A.2 Switch and control heights
If the reach is over a physical barrier or an obstruction (for example, a kitchen base cabinet) switches and controls shall be located within the reach ranges specified in Section 1138A.3...
-
Bobrick Two-Wall Toilet Compartment Grab Bar Peened B-6897.99
42" W x 54" D (107 x 137cm), 1-1/2" (38mm) dia., peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm)...
-
Bobrick Koala Kare Horizontal, Wall-Mounted Baby Changing Station KB200
Constructed of polypropylene and a unibody steel chassis, this baby changing station supports 200 lbs with minimal deflection. The steel-on-steel hinge has greater resistance to wear...
-
Gamco Horizontal Wall-Mounted Baby Changing Station Grey - BCS-2
Description FDA approved blow-molded high-density, grey-color polyethylene with Microban® antimicrobial additive. Reinforced full-length steel-on-steel hinge mechanism, with...
-
Bobrick Two-Wall Toilet Compartment Grab Bar Peened B-5897.99
42" W x 54" D (107 x 137cm), 1-1/4" (32mm) dia., peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm)...
-
Bobrick Koala Kare Oval, Wall Mounted Baby Changing Station KB208
Model Number: KB208 An array of color choice for this beautiful oval model will compliment your restroom decor. Constructed of high density polyethylene. Thesteel pivot rod...
-
Gamco Horizontal Wall-Mounted Baby Changing Station Cream - BCS-1
Description FDA approved blow-molded high-density, cream-color polyethylene with Microban® antimicrobial additive. Reinforced full-length steel-on-steel hinge mechanism, with...
-
11B-247.1.2.6 Reflecting pools
The edges of reflecting pools shall be protected by railings, walls, warning curbs or detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.6....
-
11B-809.10.5.1 Clear floor space
Controls shall be located on the wall at the foot of the bathtub. The edge of the clear floor space shall be flush with the control wall surface....
-
11B-703.4.2 Location
Where there is no wall space at the latch side of a single door or at the right side of double doors, signs shall be located on the nearest adjacent wall....
-
Surface Hazards: ADA Standard Section 609.5
Section 609.5 covers the current ADA Standards for the surfaces of grab bars and adjacent surfaces.
-
11B-609.5 Surface hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
