Alterations [§206.4 and §202.4] In alterations to existing facilities, accessible entrances are required: if an existing entrance is altered (and no fully compliant...
Search Results "Toilet Building"
-
Alterations [§206.4 and §202.4]
-
207.1 General
Means of egress shall comply with section 1003.2.13 of the International Building Code (2000 edition and 2001 Supplement) or section 1007 of the International Building Code (2003 edition...
-
11B-809.10.4 Sufficient maneuvering space
Where doors swing into the toilet and bathing or powder rooms required to comply with Section 11B-809.10, a clear maneuvering space of 30 (762 mm) inches by 48 inches (1219 mm) minimum shall...
-
Is turning space required in all rooms and spaces?
Turning space is required in certain spaces, such as toilet and bathing facilities, dressing and fitting rooms, and transient lodging guest rooms....
-
Railings—Guardrails, Handrails, and Safety
For safety, the International Building Code (IBC), http://www.iccsafe.org, section 1003.2.12 contains requirements for guardrail height and the spacing of rails where there is a drop off...
-
11B-703.1.1 Plan review and inspection
Signs as specified in Section 11B-703, or in other sections of this code, when included in the construction of new buildings or facilities, or when included, altered or replaced due to additions...
-
11B-703.1.1 Plan review and inspection
Signs as specified in Section 11B-703, or in other sections of this code, when included in the construction of new buildings or facilities, or when included, altered or replaced due to additions...
-
604.8.1.1 Size
The minimum space required in toilet compartments is provided so that a person using a wheelchair can maneuver into position at the water closet....
-
604.8.1.1 Size
The minimum space required in toilet compartments is provided so that a person using a wheelchair can maneuver into position at the water closet....
-
604.8.1.1 Size
The minimum space required in toilet compartments is provided so that a person using a wheelchair can maneuver into position at the water closet....
- CalCasp Training: Access Plan Review
-
Restrooms Main Lobby
The handles, locks, and other operating devices of the men's and women's toilet stall doors do not have a shape that is easy to grasp with one hand and require tight grasping and twisting...
-
603.2.1 Turning Space
Turning space complying with 304 shall be provided within the room. [ECTCR UFAS 4.22.3 Exception]
-
11B-603.2.1 Turning space
Turning space complying with Section 11B-304 shall be provided within the room.
-
603.2.1 Turning Space
Turning space complying with 304 shall be provided within the room.
-
H3
H3. Is the hardware (e.g., lever, pull, panic bar) usable with one hand without tight grasping, pinching, or twisting of the wrist? [ADA Standards § 4.13.9] Yes No If...
-
603.2.1 Turning Space
603.2.1 Turning Space. Turning space complying with 304 shall be provided within the room.
-
5.3.3.2 Location Where Walls Provided
Where walls or partitions are provided, the seat shall be positioned with a wall or partition to the rear and to one side of the seat for a left-hand or right-hand approach. The back...
-
603.2.1 Turning Space
Turning space complying with 304 shall be provided within the room.
-
11B-603.2.1 Turning space
11B-603.2.1 Turning space. Turning space complying with Section 11B-304 shall be provided within the room.
-
11B-604.8.1.4 Toe clearance
11B-604.8.1.4 Toe clearance. At least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond...
-
11B-604.8.1.4 Toe clearance
At least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side face of...
-
11B-603.2.1 Turning space
Turning space complying with Section 11B-304 shall be provided within the room.