Knee and toe clearance complying with 306 shall be providing. (17” min. depth.) 902 Dining Surfaces and Work Surfaces. 902.3 Height....
Search Results "Sink Depth"
Filters
Commonly Searched Documents
-
Facility
-
Grab Bars [4.20.4] and Controls [4.20.5]
Seats at the head of the tub are limited to a 15 inch depth so that back support is available from the side wall (which is why grab bars cannot be placed on the seat wall)....
-
11B-705.1.2.2.2.1 One entrance/exit point
Where it is technically infeasible to provide a minimum 72 inches (1828 mm) wide turning space, as measured perpendicular to the curb, the depth of detectable warnings may be reduced to...
-
Test Courses & Surfaces
., compacted to a depth of 5 in.) CPBR Engineered Wood Fiber J (loose-fill processed wood fibers, compacted to a depth of 5 in.)...
-
Wheelchair Spaces (M303.2)
M303.2 includes technical criteria for orientation, width, depth, and knee and toe clearance at wheelchair spaces....
-
GE® 24" Standard Clean Free-Standing Electric Range JAS02SNSS
135 lb Oven Interior Dimensions (W x H x D) (in.) 20 x 15 x 16-1/4 Overall Height 44 3/4 in Overall Width 24 in Overall Depth...
-
Bobrick ClassicSeries Recessed Seat-Cover Dispenser B-301
Rough Wall Opening: 15 5/8" W, 11" H, 2 5/8" min. depth (395 x 285 x 67mm)....
-
APPENDIX A. GUIDELINES FOR SERVICE ANIMAL RELIEF AREAS (SARA)
SARAs should include a sink with a faucet for hand washing....
-
11B-213.3.4 Lavatories
Where lavatories are provided, at least five percent but no fewer than one shall comply with Section 11B-606 _|Lavatories and Sinks|_ and shall not be located in a toilet compartment....
-
Dimensions for Adults and Children [§102]
These provisions address access for children to: drinking fountains (§602) water closets and toilet compartments (§604) lavatories and sinks (§606) and dining...
-
Bobrick ClassicSeries Recessed Waste Receptacle B-3644
Rough Wall Opening: 16" W, 29 1/4" H, 4" min. depth (405 x 745 x 100mm)....
-
Bobrick ConturaSeries Recessed Waste Receptacle with LinerMate B-43644
Rough Wall Opening: 15 7/8" W, 26 1/4" H, 4" min. depth (405 x 665 x 100mm)....
-
Bobrick TrimLineSeries Recessed Seat Cover Dispenser B-3013
Rough Wall Opening: 15 5⁄8" W, 11 1⁄4" H, 2 3⁄4" min. depth (395 x 285 x 70mm)....
-
Kawneer North America NX-8900 Terrace Doors
4" (101.6mm) sightline 2-3/4" (69.9mm) depth 3-1/4" (82.6mm) or 4-5/8" (117.5mm) frame depth High thermal performance Moderate traffic application FEATURES: NexGen™...
-
11B-407.4.1 Car dimensions
prohibits strict compliance with Section 11B-407.4.1, existing elevator car configurations that provide a clear floor area of 18 square feet (1.67 m2) minimum and also provide an inside clear depth...
-
M301.4 Lift Compatibility
Where the width of the examination surface is less than 36 inches (915 mm), the clearance depth shall extend the full width of the equipment....
-
Soiltac Powder Mix-In
The stabilizer has a penetration depth of 4 inches....
-
Section 4.9.4
Section 505.10 of the 2010 Standards requires handrails at the bottom of stairs to extend at the slope of the stair flight for a horizontal distance at least equal to one tread depth beyond...
-
Verify Framing
Grab bar backing in toilet/shower rooms. 11B-604.5, 11B-607.4, 11B-608.3 Backing for grab bars in bathtub/shower rooms. 11B-610 Width and depth...
-
Clear Floor Space [4.2.4]
A recess length of least 60 inches long is required where the recess is 15 inches or more in depth....
-
Forward Approach
The 17 to 19 inch clearance depth allows people using wheelchairs to pull up far enough under the unit to reach the spout....
-
Verify Framing
Grab bar backing in toilet/shower rooms. 11B-604.5, 11B-607.4, 11B-608.3 Backing for grab bars in bathtub/shower rooms. 11B-610 Width and depth...
-
4.21.2 Size and Clearances
Minimum guidelines for roll-in shower stalls are based on residential size fixtures (30" x 60" minimum or the space used by a standard residential tub/shower unit) and spaces (30" minimum depth...
