A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
Search Results "High-Contrast Captioning"
-
11B-904.4.1 Parallel approach
-
404.2.5 Thresholds
Thresholds, if provided at doorways, shall be 1/2 inch (13 mm) high maximum. Raised thresholds and changes in level at doorways shall comply with 302 and 303....
-
11B-504.2 Treads and risers
Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum. Treads shall be 11 inches (279 mm) deep minimum....
-
11B-504.2 Treads and risers
Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum. Treads shall be 11 inches (279 mm) deep minimum. ...
-
11B-504.2 Treads and risers
Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum. Treads shall be 11 inches (279 mm) deep minimum. ...
-
Results comparison with current accessibility guidelines
Within this range, transfer surfaces are encouraged to be between 17 and 19” (43.2-48.3cm) high (2)....
-
11B-404.2.5 Thresholds
Thresholds, if provided at doorways, shall be ½ inch (12.7 mm) high maximum. Raised thresholds and changes in level at doorways shall comply with Sections 11B-302 and 11B-303....
-
Appendix 2- Photos of Participants in the IDEA Center Research
Appendix 2- Photos of Participants in the IDEA Center Research Examples of High Seats: Examples of Very Large and Small Clear Floor Area Widths: Examples of Very Long...
-
11B-404.2.5 Thresholds
Thresholds, if provided at doorways, shall be ½ inch (12.7 mm) high maximum. Raised thresholds and changes in level at doorways shall comply with Sections 11B-302 and 11B-303....
-
11B-404.2.5 Thresholds
Thresholds, if provided at doorways, shall be ½ inch (12.7 mm) high maximum. Raised thresholds and changes in level at doorways shall comply with Sections 11B-302 and 11B-303....
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
-
10.3.1(16)
All escalator treads shall be marked by a strip of clearly contrasting color, 2 inches in width, placed parallel to and on the nose of each step....
-
§ 38.39(b)
side and a minimum character height of 2 inches for front “headsigns”, with “wide” spacing (generally, the space between letters shall be 1/16 the height of upper case letters), and shall contrast...
- SofPull® Towel Dispenser Installation Video
-
6.4.1
High tide level at tidal beaches;...
-
§ 38.93(d)(1) Requirements
Cars operating in stations with high platforms, or mini-high platforms, shall be coordinated with the boarding platform design such that the horizontal gap between a car at rest and the...
-
Addendum F: Relative Height Differences
Relative Height Difference for High and Low Transfers for Protocol A. ...
-
6.4.2
Mean high water level at river beaches; and ...
-
D. Costs to Impacted Small Entities
Table 12—Captioning Hardware Scoping Requirement per Venue Type Venue type Average number of auditoriums Captioning hardware units required per venue type...
-
Communication Access
"Open" captions can be seen by everyone while "closed" captions are visible only when activated by the viewer....
-
407.8.2.2 Obstructed Side Reach
operable part is located more than 10 inches (255 mm), but not more than 24 inches (610 mm), beyond the vertical reference plane, the height of the operable part shall be 46 inches (1170 mm) high...
-
Tread Obstacles on Beach Access Routes
Tread obstacles on a beach access route must not be more than 1 inch (25 millimeters) high....
-
Devices or Methods for Notification of Other Emergencies
Some major entertainment venues use this technology to provide those who are deaf or hard of hearing with “closed captioning” at every seat, for very little cost....
-
Accommodations for Deaf Individuals or Those Experiencing Hearing Loss
They may also use Communications Access Realtime Translation (CART) or captioning....