side and a minimum character height of 2 inches for front “headsigns”, with “wide” spacing (generally, the space between letters shall be 1/16 the height of upper case letters), and shall contrast...
Search Results "High-Contrast Captioning"
-
§ 38.39(b)
-
6.4.2
Mean high water level at river beaches; and ...
-
Addendum F: Relative Height Differences
Relative Height Difference for High and Low Transfers for Protocol A. ...
-
407.8.2.2 Obstructed Side Reach
operable part is located more than 10 inches (255 mm), but not more than 24 inches (610 mm), beyond the vertical reference plane, the height of the operable part shall be 46 inches (1170 mm) high...
-
Tread Obstacles on Beach Access Routes
Tread obstacles on a beach access route must not be more than 1 inch (25 millimeters) high....
-
407.4.8.1.1 Size
Characters shall be ½ inch (13 mm) high minimum....
-
11B-407.4.8.1.1 Size
Characters shall be ½ inch (12.7 mm) high minimum....
-
§ 36.304(b)(20)
(20) Removing high pile, low density carpeting; or...
-
Sec.36.304(b)(20)
(20) Removing high pile, low density carpeting; or...
-
11B-407.4.8.1.1 Size
Characters shall be ½ inch (12.7 mm) high minimum....
-
11B-407.4.8.1.1 Size
Characters shall be ½ inch (12.7 mm) high minimum....
-
M301.2.1 Adjustability
A high transfer position at 25 inches (635 mm); and C....
-
M302.2.1 Adjustability
A high transfer position at 25 inches (635 mm); and C....
-
407.12.2.2 Obstructed Side Reach
operable part is located more than 10 inches (255 mm), but not more than 24 inches (610 mm), beyond the vertical reference plane, the height of the operable part shall be 46 inches (1170 mm) high...
-
§ 38.113(d)(1) Requirements
Cars which provide level-boarding in stations with high platforms shall be coordinated with the boarding platform or mini-high platform design such that the horizontal gap between a car...
-
11B-307.4 Vertical clearance
Vertical clearance shall be 80 inches (2032 mm) high minimum. Guardrails or other barriers shall be provided where the vertical clearance is less than 80 inches (2032 mm) high....
-
307.4 Vertical Clearance
Vertical clearance shall be 80 inches (2030 mm) high minimum. Guardrails or other barriers shall be provided where the vertical clearance is less than 80 inches (2030 mm) high....
-
Devices or Methods for Notification of Other Emergencies
Some major entertainment venues use this technology to provide those who are deaf or hard of hearing with “closed captioning” at every seat, for very little cost....
-
Accommodations for Deaf Individuals or Those Experiencing Hearing Loss
They may also use Communications Access Realtime Translation (CART) or captioning....
-
D. Costs to Impacted Small Entities
Table 12—Captioning Hardware Scoping Requirement per Venue Type Venue type Average number of auditoriums Captioning hardware units required per venue type...
-
Communication Access
"Open" captions can be seen by everyone while "closed" captions are visible only when activated by the viewer....
-
Check-out Aisle Counter Height
The counter surface of check-out aisle counters is required to be 38 inches high maximum. Comments from persons with disabilities considered 38 inches to be too high. Response....
-
307.4 Vertical Clearance
Vertical clearance shall be 80 inches (2030 mm) high minimum. Guardrails or other barriers shall be provided where the vertical clearance is less than 80 inches (2030 mm) high....
-
Stairway Handrails Requirements in the ADA Standards (§504)
The standards limit the protrusion of objects with leading edges that are above 27” high and no more than 80” high....